{"title":"ST Suspension","description":"","products":[{"product_id":"st-xa-coilovers-porsche-cayman-987-06-up","title":"ST XA Coilovers Porsche Cayman 987 06-UP","description":"\u003cp\u003eFor maximum axle loads for your vehicle, please refer to your VIN plate. It is usually the third and fourth numbers for front and rear axle loads. \u003c\/p\u003e\u003cp\u003eFor drivers wanting more than just ride height adjustment comes the ST XA coilover. Developed alongside KW Automotive the ST XA allows individual adjustment of the damping to suit just about all your driving needs!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerfect for sporty driving\u003c\/strong\u003e\u003cbr\u003eST XA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. Any vehicle fitted with ST XA coilovers will act much more agile and sporty compared to standard.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy lowering adjustment\u003c\/strong\u003e\u003cbr\u003eLike all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKW Engineering: Exclusive for ST suspension\u003c\/strong\u003e\u003cbr\u003eThe high-quality ST XA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExternal damper adjustment\u003c\/li\u003e\n\u003cli\u003eLatest damping technology for maximum longevity\u003c\/li\u003e\n\u003cli\u003eReduced system friction for effective damping adjustment\u003c\/li\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle (when possible) with thread adjustment\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for an optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, race spring system and bumpers with dust protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003eAt vehicles equipped with electronic damping, the electronic damping control needs to be deactivated. Deactivation kit KW Part-no. 68510148.    \u003cstrong\u003eLowering Front: \u003c\/strong\u003e30-60mm\u003cstrong\u003eLowering Rear: \u003c\/strong\u003e30-60mm","brand":"ST Suspension","offers":[{"title":"Default Title","offer_id":56538927694210,"sku":"ST-18271016-1","price":1471.14,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/9381\/1260\/files\/stxa_ja1nhwqt77atyrye_07fbd2c3-3e3a-4720-9d5e-af2a5922bd66.jpg?v=1775995183"},{"product_id":"kw-st-electronic-damping-cancellation-kit-vag-group-inc-volkswagen-golf-mk7ellation-kit-audi-a3-s3-8v","title":"KW\/ST Electronic Damping Cancellation Kit VAG Group inc Volkswagen Golf MK7ellation Kit Audi A3\/S3 8V","description":"\u003cp\u003e- Avoids error messages when changing the suspension\u003cbr\u003e- Only the standard damper control is shut down and at the same time it prevents error messages\u003cbr\u003e- Functions of the control unit remain fully\u003cbr\u003e- Can also be used for other manufacturers and OE aftermarket suspensions separately\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFits the following vehicles\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAudi A3 Sportback, sedan Type GY\u003cbr\u003eAudi S3 Sportback, sedan Type GY\u003cbr\u003eAudi RS3 Sportback, sedan Type GY\u003cbr\u003eAudi Q3 Type F3\u003cbr\u003eAudi RS Q3 Type F3\u003cbr\u003eBMW X5 (G05) Type G5X\u003cbr\u003eBMW X5 M incl. Competition (F95) Type F56XM\u003cbr\u003eBMW X6 (G06) Type G6X\u003cbr\u003eBMW X6 M incl. Competition (F96) Type F56XM\u003cbr\u003eSeat Ateca Type 5FP\u003cbr\u003eSeat Cupra Born Type K1\u003cbr\u003eSeat Cupra Formentor Type KM\u003cbr\u003eSeat Cupra Leon incl. Sportstourer Type KL\u003cbr\u003eSeat Leon, Leon station wagon Type 5F\u003cbr\u003eSeat Leon incl. Sportstourer Type KL\u003cbr\u003eSeat Tarraco Type KN\u003cbr\u003eSkoda Karoq Type NU\u003cbr\u003eSkoda Kodiaq Type NS\u003cbr\u003eSkoda Octavia Type 5E\u003cbr\u003eSkoda Octavia Type NX\u003cbr\u003eSkoda Superb III Mod.2016- Type 3T\u003cbr\u003eVW Arteon Type 3H\u003cbr\u003eVW Golf VII, Golf VII Sportsvan, Golf VII station wagon Type AU, AUV\u003cbr\u003eVW Golf VIII Type CD\u003cbr\u003eVW Golf VIII station wagon Type CDV\u003cbr\u003eVW ID.3 Type E1\u003cbr\u003eVW Passat B8 Type 3C from 11\/14-\u003cbr\u003eVW T-Roc Type A1\u003cbr\u003eVW Tiguan II Type 5N\u003cbr\u003eVW Touran II Type 1T\u003c\/p\u003e","brand":"ST Suspension","offers":[{"title":"Default Title","offer_id":56538927792514,"sku":"KW-68510342","price":321.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/9381\/1260\/files\/68510342.jpg?v=1775995184"},{"product_id":"st-xta-coilovers-subaru-impreza-gd-gg-05-up","title":"ST XTA Coilovers Subaru Impreza GD\/GG 05-UP","description":"\u003cp\u003eFor maximum axle loads for your vehicle, please refer to your VIN plate. It is usually the third and fourth numbers for front and rear axle loads. \u003c\/p\u003e\u003cp\u003eFor those who demand the absolute best performance comes the ST XTA coilover. The full driving behaviour of your car can be adjusted using KW damper technology along with an adjustable aluminium uniball top mount for fine-tuning of the camber and caster!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePerformance driving in mind\u003c\/strong\u003e\u003cbr\u003eST XTA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminium adjustable topmount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy lowering adjustment\u003c\/strong\u003e\u003cbr\u003eLike all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XTA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKW Engineering: Exclusive for ST suspension\u003c\/strong\u003e\u003cbr\u003eThe high-quality ST XTA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLatest damping technology for maximum longevity\u003c\/li\u003e\n\u003cli\u003eReduced system friction for effective damping adjustment\u003c\/li\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle (when possible) with thread adjustment\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for an optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, race spring system and bumpers with dust protection\u003c\/li\u003e\n\u003cli\u003eAluminium adjustable uniball top mounts (when possible)\u003c\/li\u003e\n\u003cli\u003eScaled camber adjustment (optionally also caster), when possible\u003c\/li\u003e\n\u003cli\u003eExternally adjustable damping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003eIn combination with original wheels and tyres, wheelspacers might be necessary.    \u003cstrong\u003eLowering Front: \u003c\/strong\u003e25-55mm\u003cstrong\u003eLowering Rear: \u003c\/strong\u003e25-45mm","brand":"ST Suspension","offers":[{"title":"Default Title","offer_id":56538927989122,"sku":"ST-18245804-2","price":1471.14,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/9381\/1260\/files\/stxta_pl0hfr8xlfnwqnum_dd88b179-dbc7-4d6d-9617-13664b97399f.jpg?v=1775995184"},{"product_id":"st-xta-coilovers-bmw-3-series-e90-e91-e93-estate-convertible-05-up","title":"ST XTA Coilovers BMW 3-series E90\/E91\/E93 Estate\/Convertible 05-UP","description":"\u003cp\u003eFor maximum axle loads for your vehicle, please refer to your VIN plate. It is usually the third and fourth numbers for front and rear axle loads. \u003c\/p\u003e\u003cp\u003eFor those who demand the absolute best performance comes the ST XTA coilover. The full driving behaviour of your car can be adjusted using KW damper technology along with an adjustable aluminium uniball top mount for fine-tuning of the camber and caster!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePerformance driving in mind\u003c\/strong\u003e\u003cbr\u003eST XTA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminium adjustable topmount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy lowering adjustment\u003c\/strong\u003e\u003cbr\u003eLike all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XTA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKW Engineering: Exclusive for ST suspension\u003c\/strong\u003e\u003cbr\u003eThe high-quality ST XTA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLatest damping technology for maximum longevity\u003c\/li\u003e\n\u003cli\u003eReduced system friction for effective damping adjustment\u003c\/li\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle (when possible) with thread adjustment\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for an optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, race spring system and bumpers with dust protection\u003c\/li\u003e\n\u003cli\u003eAluminium adjustable uniball top mounts (when possible)\u003c\/li\u003e\n\u003cli\u003eScaled camber adjustment (optionally also caster), when possible\u003c\/li\u003e\n\u003cli\u003eExternally adjustable damping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003eExcluding four wheel drive models. In combination with original wheels and tyres, wheelspacers might be necessary.   \u003cstrong\u003eLowering Front: \u003c\/strong\u003e30-60mm\u003cstrong\u003eLowering Rear: \u003c\/strong\u003e20-50mm","brand":"ST Suspension","offers":[{"title":"Default Title","offer_id":56538928218498,"sku":"ST-18220833","price":1387.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/9381\/1260\/files\/stxta_kll3mtjyathm6ozq_3c771255-6316-4c22-9744-1fd729f36b41.jpg?v=1775995184"},{"product_id":"st-xa-coilovers-subaru-impreza-gd-gg-ggs-02-05","title":"ST XA Coilovers Subaru Impreza GD\/GG\/GGS 02-05","description":"\u003cp\u003eFor maximum axle loads for your vehicle, please refer to your VIN plate. It is usually the third and fourth numbers for front and rear axle loads. \u003c\/p\u003e\u003cp\u003eFor drivers wanting more than just ride height adjustment comes the ST XA coilover. Developed alongside KW Automotive the ST XA allows individual adjustment of the damping to suit just about all your driving needs!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerfect for sporty driving\u003c\/strong\u003e\u003cbr\u003eST XA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. Any vehicle fitted with ST XA coilovers will act much more agile and sporty compared to standard.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy lowering adjustment\u003c\/strong\u003e\u003cbr\u003eLike all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKW Engineering: Exclusive for ST suspension\u003c\/strong\u003e\u003cbr\u003eThe high-quality ST XA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExternal damper adjustment\u003c\/li\u003e\n\u003cli\u003eLatest damping technology for maximum longevity\u003c\/li\u003e\n\u003cli\u003eReduced system friction for effective damping adjustment\u003c\/li\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle (when possible) with thread adjustment\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for an optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, race spring system and bumpers with dust protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003eIn combination with original wheels and tyres, wheelspacers might be necessary.    \u003cstrong\u003eLowering Front: \u003c\/strong\u003e25-55mm\u003cstrong\u003eLowering Rear: \u003c\/strong\u003e25-45mm","brand":"ST Suspension","offers":[{"title":"Default Title","offer_id":56538928415106,"sku":"ST-18245004","price":1306.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/9381\/1260\/files\/stxa_yupficuayga8qxe9_3c8f96c6-1a83-4818-9646-17f8f4546137.jpg?v=1775995185"},{"product_id":"st-xa-coilovers-porsche-boxster-987-04-up","title":"ST XA Coilovers Porsche Boxster 987 04-UP","description":"\u003cp\u003eFor maximum axle loads for your vehicle, please refer to your VIN plate. It is usually the third and fourth numbers for front and rear axle loads. \u003c\/p\u003e\u003cp\u003eFor drivers wanting more than just ride height adjustment comes the ST XA coilover. Developed alongside KW Automotive the ST XA allows individual adjustment of the damping to suit just about all your driving needs!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerfect for sporty driving\u003c\/strong\u003e\u003cbr\u003eST XA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. Any vehicle fitted with ST XA coilovers will act much more agile and sporty compared to standard.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy lowering adjustment\u003c\/strong\u003e\u003cbr\u003eLike all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKW Engineering: Exclusive for ST suspension\u003c\/strong\u003e\u003cbr\u003eThe high-quality ST XA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExternal damper adjustment\u003c\/li\u003e\n\u003cli\u003eLatest damping technology for maximum longevity\u003c\/li\u003e\n\u003cli\u003eReduced system friction for effective damping adjustment\u003c\/li\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle (when possible) with thread adjustment\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for an optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, race spring system and bumpers with dust protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003eIf the car is equipped with PASM, the PASM needs to be disabled.    \u003cstrong\u003eLowering Front: \u003c\/strong\u003e30-60mm\u003cstrong\u003eLowering Rear: \u003c\/strong\u003e30-60mm","brand":"ST Suspension","offers":[{"title":"Default Title","offer_id":56538928677250,"sku":"ST-18271016","price":1471.14,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/9381\/1260\/files\/stxa_ja1nhwqt77atyrye.jpg?v=1775995185"},{"product_id":"st-xa-coilovers-bmw-z3-coupe-roadster-95-up","title":"ST XA Coilovers BMW Z3 Coupe\/Roadster 95-UP","description":"\u003cp\u003eFor maximum axle loads for your vehicle, please refer to your VIN plate. It is usually the third and fourth numbers for front and rear axle loads. \u003c\/p\u003e\u003cp\u003eFor drivers wanting more than just ride height adjustment comes the ST XA coilover. Developed alongside KW Automotive the ST XA allows individual adjustment of the damping to suit just about all your driving needs!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerfect for sporty driving\u003c\/strong\u003e\u003cbr\u003eST XA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. Any vehicle fitted with ST XA coilovers will act much more agile and sporty compared to standard.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy lowering adjustment\u003c\/strong\u003e\u003cbr\u003eLike all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKW Engineering: Exclusive for ST suspension\u003c\/strong\u003e\u003cbr\u003eThe high-quality ST XA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExternal damper adjustment\u003c\/li\u003e\n\u003cli\u003eLatest damping technology for maximum longevity\u003c\/li\u003e\n\u003cli\u003eReduced system friction for effective damping adjustment\u003c\/li\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle (when possible) with thread adjustment\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for an optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, race spring system and bumpers with dust protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003eIn combination with original wheels and tyres, wheelspacers might be necessary.    \u003cstrong\u003eLowering Front: \u003c\/strong\u003e35-70mm\u003cstrong\u003eLowering Rear: \u003c\/strong\u003e30-60mm","brand":"ST Suspension","offers":[{"title":"Default Title","offer_id":56538928841090,"sku":"ST-18220016","price":1023.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/9381\/1260\/files\/stxa_wqaqjom7rs2z0oip_4b527c2c-d3e9-4fa6-a8c7-dd630081d020.jpg?v=1775995185"},{"product_id":"st-xa-coilovers-bmw-2-series-gran-tourer-f46-2wd-no-edc-15-up","title":"ST XA Coilovers BMW 2-series Gran Tourer F46 2WD No EDC 15-UP","description":"\u003cp\u003eFor maximum axle loads for your vehicle, please refer to your VIN plate. It is usually the third and fourth numbers for front and rear axle loads. \u003c\/p\u003e\u003cp\u003eFor drivers wanting more than just ride height adjustment comes the ST XA coilover. Developed alongside KW Automotive the ST XA allows individual adjustment of the damping to suit just about all your driving needs!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerfect for sporty driving\u003c\/strong\u003e\u003cbr\u003eST XA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. Any vehicle fitted with ST XA coilovers will act much more agile and sporty compared to standard.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy lowering adjustment\u003c\/strong\u003e\u003cbr\u003eLike all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKW Engineering: Exclusive for ST suspension\u003c\/strong\u003e\u003cbr\u003eThe high-quality ST XA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExternal damper adjustment\u003c\/li\u003e\n\u003cli\u003eLatest damping technology for maximum longevity\u003c\/li\u003e\n\u003cli\u003eReduced system friction for effective damping adjustment\u003c\/li\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle (when possible) with thread adjustment\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for an optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, race spring system and bumpers with dust protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003eNot for vehicles with electronic damper control.    \u003cstrong\u003eLowering Front: \u003c\/strong\u003e35-55mm\u003cstrong\u003eLowering Rear: \u003c\/strong\u003e35-55mm","brand":"ST Suspension","offers":[{"title":"Default Title","offer_id":56538928906626,"sku":"ST-182200BN-1","price":1078.11,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/9381\/1260\/files\/stxa_c93kgdv5547qbbof_9007b179-dece-4be4-abdf-031d6e0ee755.jpg?v=1775995186"},{"product_id":"st-xa-coilovers-bmw-2-series-active-tourer-f45-2wd-4wd-no-edc-14-up","title":"ST XA Coilovers BMW 2-series Active Tourer F45 2WD 4WD No EDC 14-UP","description":"\u003cp\u003eFor maximum axle loads for your vehicle, please refer to your VIN plate. It is usually the third and fourth numbers for front and rear axle loads. \u003c\/p\u003e\u003cp\u003eFor drivers wanting more than just ride height adjustment comes the ST XA coilover. Developed alongside KW Automotive the ST XA allows individual adjustment of the damping to suit just about all your driving needs!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerfect for sporty driving\u003c\/strong\u003e\u003cbr\u003eST XA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. Any vehicle fitted with ST XA coilovers will act much more agile and sporty compared to standard.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy lowering adjustment\u003c\/strong\u003e\u003cbr\u003eLike all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKW Engineering: Exclusive for ST suspension\u003c\/strong\u003e\u003cbr\u003eThe high-quality ST XA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExternal damper adjustment\u003c\/li\u003e\n\u003cli\u003eLatest damping technology for maximum longevity\u003c\/li\u003e\n\u003cli\u003eReduced system friction for effective damping adjustment\u003c\/li\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle (when possible) with thread adjustment\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for an optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, race spring system and bumpers with dust protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003eNot for vehicles with electronic damper control.    \u003cstrong\u003eLowering Front: \u003c\/strong\u003e40-60mm\u003cstrong\u003eLowering Rear: \u003c\/strong\u003e45-65mm","brand":"ST Suspension","offers":[{"title":"Default Title","offer_id":56538929004930,"sku":"ST-182200BN","price":1078.11,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/9381\/1260\/files\/stxa_c93kgdv5547qbbof_1565dbeb-ee6b-45b1-9299-715c588bfd03.jpg?v=1775995187"},{"product_id":"st-xa-coilovers-bmw-1-series-e82-e88-coupe-07-up","title":"ST XA Coilovers BMW 1-series E82\/E88 Coupe 07-UP","description":"\u003cp\u003eFor maximum axle loads for your vehicle, please refer to your VIN plate. It is usually the third and fourth numbers for front and rear axle loads. \u003c\/p\u003e\u003cp\u003eFor drivers wanting more than just ride height adjustment comes the ST XA coilover. Developed alongside KW Automotive the ST XA allows individual adjustment of the damping to suit just about all your driving needs!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerfect for sporty driving\u003c\/strong\u003e\u003cbr\u003eST XA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. Any vehicle fitted with ST XA coilovers will act much more agile and sporty compared to standard.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy lowering adjustment\u003c\/strong\u003e\u003cbr\u003eLike all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKW Engineering: Exclusive for ST suspension\u003c\/strong\u003e\u003cbr\u003eThe high-quality ST XA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExternal damper adjustment\u003c\/li\u003e\n\u003cli\u003eLatest damping technology for maximum longevity\u003c\/li\u003e\n\u003cli\u003eReduced system friction for effective damping adjustment\u003c\/li\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle (when possible) with thread adjustment\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for an optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, race spring system and bumpers with dust protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003eExcluding four wheel drive models. In combination with original wheels and tyres, wheelspacers might be necessary.   \u003cstrong\u003eLowering Front: \u003c\/strong\u003e30-55mm\u003cstrong\u003eLowering Rear: \u003c\/strong\u003e25-50mm","brand":"ST Suspension","offers":[{"title":"Default Title","offer_id":56538929234306,"sku":"ST-18220039-1","price":1023.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/9381\/1260\/files\/stxa_nji02ubvizvxhucy_1dd6355c-5a4d-4507-bf03-eb0f683ef700.jpg?v=1775995187"},{"product_id":"st-xa-coilovers-audi-a6-4f-saloon-2wd-quattro-04-up-max-front-axle-load-1241-1305kg","title":"ST XA Coilovers Audi A6 4F Saloon 2WD Quattro 04-UP - Max Front Axle Load 1241-1305kg","description":"\u003cp\u003eFor maximum axle loads for your vehicle, please refer to your VIN plate. It is usually the third and fourth numbers for front and rear axle loads. \u003c\/p\u003e\u003cp\u003eFor drivers wanting more than just ride height adjustment comes the ST XA coilover. Developed alongside KW Automotive the ST XA allows individual adjustment of the damping to suit just about all your driving needs!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerfect for sporty driving\u003c\/strong\u003e\u003cbr\u003eST XA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. Any vehicle fitted with ST XA coilovers will act much more agile and sporty compared to standard.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy lowering adjustment\u003c\/strong\u003e\u003cbr\u003eLike all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKW Engineering: Exclusive for ST suspension\u003c\/strong\u003e\u003cbr\u003eThe high-quality ST XA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExternal damper adjustment\u003c\/li\u003e\n\u003cli\u003eLatest damping technology for maximum longevity\u003c\/li\u003e\n\u003cli\u003eReduced system friction for effective damping adjustment\u003c\/li\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle (when possible) with thread adjustment\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for an optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, race spring system and bumpers with dust protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003eNot for vehicles with electronic damper control. Excluding models with automatic level control, or automatic level system can be adjusted in accordance.   \u003cstrong\u003eLowering Front: \u003c\/strong\u003e35-65mm\u003cstrong\u003eLowering Rear: \u003c\/strong\u003e35-65mm","brand":"ST Suspension","offers":[{"title":"Default Title","offer_id":56538929398146,"sku":"ST-18210059","price":1078.11,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/9381\/1260\/files\/stxa_nji02ubvizvxhucy_8f8b9c1a-ec71-4215-969a-dae143286602.jpg?v=1775995187"},{"product_id":"st-x-coilovers-volkswagen-golf-jetta-mk2-2wd-83-92","title":"ST X Coilovers Volkswagen Golf\/Jetta MK2 2WD 83-92","description":"\u003cp\u003eFor maximum axle loads for your vehicle, please refer to your VIN plate. It is usually the third and fourth numbers for front and rear axle loads. \u003c\/p\u003e\u003cp\u003eNeed to get low? ST coilovers feature a continuous thread construction for height adjustment from moderate to eXtreme! Each coilover is manufactured by KW Automotive and their expertise and know how ensures maximum quality and fantastic driving dynamics.\u003c\/p\u003e\n\u003cp\u003eOnce installed, the ST X coilover can be easily adjusted using a polyamide ring on the galvanized, multiple-sealed strut. Adjustment is different for each car, but typically you can expect between 35 and 65mm of lowering on both the front and rear axles. For lowered cars as standard (such as the BMW E9x 3-series) the ST X coilover features a range of 30 to 60mm (front axle) and 25-55mm (rear axle).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImproved driving dynamics and handling\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned in conjunction with KW Germany, ST X coilovers deliver a sporty handling by reducing the car's bodyroll during compression as well as improving agility when driving fast. The high-quality production of each ST X coilover includes a low-friction and pressure resistant housing alongside a chrome-plated piston rod for maximum longevity. A mono block guide and ST seal package ensures the twin-tube dampers remain free of dirt particles in all weather conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle thread adjustment (when possible)\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, race spring system and bumpers with dust protection\u003c\/li\u003e\n\u003cli\u003ePowerful twin-tube dampers with high-quality components for maximum longevity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003eExcluding four wheel drive models.    \u003cstrong\u003eLowering Front: \u003c\/strong\u003e45-85mm\u003cstrong\u003eLowering Rear: \u003c\/strong\u003e45-85mm","brand":"ST Suspension","offers":[{"title":"Default Title","offer_id":56538931102082,"sku":"ST-13280002","price":816.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/9381\/1260\/files\/stx_vodtcyc3lillipua_b49352c6-cce7-41b9-86de-a95920aae7bd.jpg?v=1775995188"},{"product_id":"st-x-coilovers-skoda-yeti-5l-2wd-50mm-strut-09-up","title":"ST X Coilovers Skoda Yeti 5L 2WD 50mm Strut 09-UP","description":"\u003cp\u003eFor maximum axle loads for your vehicle, please refer to your VIN plate. It is usually the third and fourth numbers for front and rear axle loads. \u003c\/p\u003e\u003cp\u003eNeed to get low? ST coilovers feature a continuous thread construction for height adjustment from moderate to eXtreme! Each coilover is manufactured by KW Automotive and their expertise and know how ensures maximum quality and fantastic driving dynamics.\u003c\/p\u003e\n\u003cp\u003eOnce installed, the ST X coilover can be easily adjusted using a polyamide ring on the galvanized, multiple-sealed strut. Adjustment is different for each car, but typically you can expect between 35 and 65mm of lowering on both the front and rear axles. For lowered cars as standard (such as the BMW E9x 3-series) the ST X coilover features a range of 30 to 60mm (front axle) and 25-55mm (rear axle).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImproved driving dynamics and handling\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned in conjunction with KW Germany, ST X coilovers deliver a sporty handling by reducing the car's bodyroll during compression as well as improving agility when driving fast. The high-quality production of each ST X coilover includes a low-friction and pressure resistant housing alongside a chrome-plated piston rod for maximum longevity. A mono block guide and ST seal package ensures the twin-tube dampers remain free of dirt particles in all weather conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle thread adjustment (when possible)\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, race spring system and bumpers with dust protection\u003c\/li\u003e\n\u003cli\u003ePowerful twin-tube dampers with high-quality components for maximum longevity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003eOnly for cars with a clamp diameter of 50 mm on the front axle.    \u003cstrong\u003eLowering Front: \u003c\/strong\u003e45-85mm\u003cstrong\u003eLowering Rear: \u003c\/strong\u003e55-85mm","brand":"ST Suspension","offers":[{"title":"Default Title","offer_id":56538931429762,"sku":"ST-13282015","price":915.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/9381\/1260\/files\/stx_z6saqbrhcmp2m0a8_1bb00b56-ba89-4f91-a534-3b3fb5d6a3d9.jpg?v=1775995188"},{"product_id":"st-x-coilovers-mini-r50-r52-r53-02-06","title":"ST X Coilovers Mini R50\/R52\/R53 02-06","description":"\u003cp\u003eFor maximum axle loads for your vehicle, please refer to your VIN plate. It is usually the third and fourth numbers for front and rear axle loads. \u003c\/p\u003e\u003cp\u003eNeed to get low? ST coilovers feature a continuous thread construction for height adjustment from moderate to eXtreme! Each coilover is manufactured by KW Automotive and their expertise and know how ensures maximum quality and fantastic driving dynamics.\u003c\/p\u003e\n\u003cp\u003eOnce installed, the ST X coilover can be easily adjusted using a polyamide ring on the galvanized, multiple-sealed strut. Adjustment is different for each car, but typically you can expect between 35 and 65mm of lowering on both the front and rear axles. For lowered cars as standard (such as the BMW E9x 3-series) the ST X coilover features a range of 30 to 60mm (front axle) and 25-55mm (rear axle).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImproved driving dynamics and handling\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned in conjunction with KW Germany, ST X coilovers deliver a sporty handling by reducing the car's bodyroll during compression as well as improving agility when driving fast. The high-quality production of each ST X coilover includes a low-friction and pressure resistant housing alongside a chrome-plated piston rod for maximum longevity. A mono block guide and ST seal package ensures the twin-tube dampers remain free of dirt particles in all weather conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle thread adjustment (when possible)\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, race spring system and bumpers with dust protection\u003c\/li\u003e\n\u003cli\u003ePowerful twin-tube dampers with high-quality components for maximum longevity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003eIn combination with original wheels and tyres, wheelspacers might be necessary. For rear axle camber adjustment we recommend the installation of the car specific adjustable control arm set from KW. KW Part-no. 68510065.   \u003cstrong\u003eLowering Front: \u003c\/strong\u003e20-50mm\u003cstrong\u003eLowering Rear: \u003c\/strong\u003e20-50mm","brand":"ST Suspension","offers":[{"title":"Default Title","offer_id":56538931626370,"sku":"ST-13220042","price":860.31,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/9381\/1260\/files\/stx_efjnarfjqmmwmwyb_e3d8a3de-73a5-4277-a370-46767aa1c583.jpg?v=1775995189"},{"product_id":"st-x-coilovers-honda-civic-fn2-type-r-07-up","title":"ST X Coilovers Honda Civic FN2 Type-R 07-UP","description":"\u003cp\u003eFor maximum axle loads for your vehicle, please refer to your VIN plate. It is usually the third and fourth numbers for front and rear axle loads. \u003c\/p\u003e\u003cp\u003eNeed to get low? ST coilovers feature a continuous thread construction for height adjustment from moderate to eXtreme! Each coilover is manufactured by KW Automotive and their expertise and know how ensures maximum quality and fantastic driving dynamics.\u003c\/p\u003e\n\u003cp\u003eOnce installed, the ST X coilover can be easily adjusted using a polyamide ring on the galvanized, multiple-sealed strut. Adjustment is different for each car, but typically you can expect between 35 and 65mm of lowering on both the front and rear axles. For lowered cars as standard (such as the BMW E9x 3-series) the ST X coilover features a range of 30 to 60mm (front axle) and 25-55mm (rear axle).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImproved driving dynamics and handling\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned in conjunction with KW Germany, ST X coilovers deliver a sporty handling by reducing the car's bodyroll during compression as well as improving agility when driving fast. The high-quality production of each ST X coilover includes a low-friction and pressure resistant housing alongside a chrome-plated piston rod for maximum longevity. A mono block guide and ST seal package ensures the twin-tube dampers remain free of dirt particles in all weather conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle thread adjustment (when possible)\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, race spring system and bumpers with dust protection\u003c\/li\u003e\n\u003cli\u003ePowerful twin-tube dampers with high-quality components for maximum longevity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e    \u003cstrong\u003eLowering Front: \u003c\/strong\u003e0-30mm\u003cstrong\u003eLowering Rear: \u003c\/strong\u003e0-30mm","brand":"ST Suspension","offers":[{"title":"Default Title","offer_id":56538931855746,"sku":"ST-13250021","price":860.31,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/9381\/1260\/files\/stx_fkot0d6tfsrfz7gq_e2934444-47b8-4029-b26c-efef4e81885b.jpg?v=1775995189"},{"product_id":"st-x-coilovers-honda-civic-fk-fn-exc-type-r-06-12-max-front-axle-load-upto-940kg","title":"ST X Coilovers Honda Civic FK\/FN Exc Type-R 06-12 - Max Front Axle Load Upto 940kg","description":"\u003cp\u003eFor maximum axle loads for your vehicle, please refer to your VIN plate. It is usually the third and fourth numbers for front and rear axle loads. \u003c\/p\u003e\u003cp\u003eNeed to get low? ST coilovers feature a continuous thread construction for height adjustment from moderate to eXtreme! Each coilover is manufactured by KW Automotive and their expertise and know how ensures maximum quality and fantastic driving dynamics.\u003c\/p\u003e\n\u003cp\u003eOnce installed, the ST X coilover can be easily adjusted using a polyamide ring on the galvanized, multiple-sealed strut. Adjustment is different for each car, but typically you can expect between 35 and 65mm of lowering on both the front and rear axles. For lowered cars as standard (such as the BMW E9x 3-series) the ST X coilover features a range of 30 to 60mm (front axle) and 25-55mm (rear axle).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImproved driving dynamics and handling\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned in conjunction with KW Germany, ST X coilovers deliver a sporty handling by reducing the car's bodyroll during compression as well as improving agility when driving fast. The high-quality production of each ST X coilover includes a low-friction and pressure resistant housing alongside a chrome-plated piston rod for maximum longevity. A mono block guide and ST seal package ensures the twin-tube dampers remain free of dirt particles in all weather conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle thread adjustment (when possible)\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, race spring system and bumpers with dust protection\u003c\/li\u003e\n\u003cli\u003ePowerful twin-tube dampers with high-quality components for maximum longevity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e    \u003cstrong\u003eLowering Front: \u003c\/strong\u003e20-50mm\u003cstrong\u003eLowering Rear: \u003c\/strong\u003e20-50mm","brand":"ST Suspension","offers":[{"title":"Default Title","offer_id":56538931986818,"sku":"ST-13250017","price":860.31,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/9381\/1260\/files\/stx_fkot0d6tfsrfz7gq_c042f170-ca82-47a4-bcf7-b2c5b83b3699.jpg?v=1775995189"},{"product_id":"st-x-coilovers-dodge-challenger-11-up","title":"ST X Coilovers Dodge Challenger 11-UP","description":"\u003cp\u003eFor maximum axle loads for your vehicle, please refer to your VIN plate. It is usually the third and fourth numbers for front and rear axle loads. \u003c\/p\u003e\u003cp\u003eNeed to get low? ST coilovers feature a continuous thread construction for height adjustment from moderate to eXtreme! Each coilover is manufactured by KW Automotive and their expertise and know how ensures maximum quality and fantastic driving dynamics.\u003c\/p\u003e\n\u003cp\u003eOnce installed, the ST X coilover can be easily adjusted using a polyamide ring on the galvanized, multiple-sealed strut. Adjustment is different for each car, but typically you can expect between 35 and 65mm of lowering on both the front and rear axles. For lowered cars as standard (such as the BMW E9x 3-series) the ST X coilover features a range of 30 to 60mm (front axle) and 25-55mm (rear axle).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImproved driving dynamics and handling\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned in conjunction with KW Germany, ST X coilovers deliver a sporty handling by reducing the car's bodyroll during compression as well as improving agility when driving fast. The high-quality production of each ST X coilover includes a low-friction and pressure resistant housing alongside a chrome-plated piston rod for maximum longevity. A mono block guide and ST seal package ensures the twin-tube dampers remain free of dirt particles in all weather conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle thread adjustment (when possible)\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, race spring system and bumpers with dust protection\u003c\/li\u003e\n\u003cli\u003ePowerful twin-tube dampers with high-quality components for maximum longevity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003eAt vehicles equipped with electronic damping, the electronic damping control needs to be deactivated. Deactivation kit KW Part-no. 68510314.    \u003cstrong\u003eLowering Front: \u003c\/strong\u003e30-65mm\u003cstrong\u003eLowering Rear: \u003c\/strong\u003e35-65mm","brand":"ST Suspension","offers":[{"title":"Default Title","offer_id":56538932150658,"sku":"ST-13227018","price":1023.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/9381\/1260\/files\/stx_zvfd0t9pywlubv8y_a08eb974-b30a-4e2d-a55e-b1fc7a3afe83.jpg?v=1775995190"},{"product_id":"st-x-coilovers-bmw-m3-e36-92-99","title":"ST X Coilovers BMW M3 E36 92-99","description":"\u003cp\u003eFor maximum axle loads for your vehicle, please refer to your VIN plate. It is usually the third and fourth numbers for front and rear axle loads. \u003c\/p\u003e\u003cp\u003eNeed to get low? ST coilovers feature a continuous thread construction for height adjustment from moderate to eXtreme! Each coilover is manufactured by KW Automotive and their expertise and know how ensures maximum quality and fantastic driving dynamics.\u003c\/p\u003e\n\u003cp\u003eOnce installed, the ST X coilover can be easily adjusted using a polyamide ring on the galvanized, multiple-sealed strut. Adjustment is different for each car, but typically you can expect between 35 and 65mm of lowering on both the front and rear axles. For lowered cars as standard (such as the BMW E9x 3-series) the ST X coilover features a range of 30 to 60mm (front axle) and 25-55mm (rear axle).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImproved driving dynamics and handling\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned in conjunction with KW Germany, ST X coilovers deliver a sporty handling by reducing the car's bodyroll during compression as well as improving agility when driving fast. The high-quality production of each ST X coilover includes a low-friction and pressure resistant housing alongside a chrome-plated piston rod for maximum longevity. A mono block guide and ST seal package ensures the twin-tube dampers remain free of dirt particles in all weather conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle thread adjustment (when possible)\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, race spring system and bumpers with dust protection\u003c\/li\u003e\n\u003cli\u003ePowerful twin-tube dampers with high-quality components for maximum longevity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003eIn combination with original wheels and tyres, wheelspacers might be necessary.    \u003cstrong\u003eLowering Front: \u003c\/strong\u003e30-60mm\u003cstrong\u003eLowering Rear: \u003c\/strong\u003e20-45mm","brand":"ST Suspension","offers":[{"title":"Default Title","offer_id":56538932281730,"sku":"ST-13220012","price":915.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/9381\/1260\/files\/stx_zvfd0t9pywlubv8y_55c92fbb-1b1c-4b3a-9b78-9b99a39b4988.jpg?v=1775995191"},{"product_id":"kw-st-electronic-damping-cancellation-kit-dodge-challenger-07","title":"KW\/ST Electronic Damping Cancellation Kit Dodge Challenger 07+","description":"\u003cp\u003e\u003cb\u003e\u003cspan style=\"font-size: large;\"\u003eKW\/ST cancellation kits for electronic damper adjustment\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cdiv class=\"std\"\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e- Avoids error messages when changing the suspension\u003cbr\u003e- Only the standard damper control is shut down and at the same time it prevents error messages\u003cbr\u003e- Functions of the control unit remain fully\u003cbr\u003e- Can also be used for other manufacturers and OE aftermarket suspensions separately\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFits the following vehicles\u003c\/span\u003e\u003c\/p\u003e\n\u003ctable class=\"data-table-compatibile-car\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eVehicle shape\u003c\/th\u003e\n\u003cth\u003eFuel\u003c\/th\u003e\n\u003cth\u003ePerformance\u003c\/th\u003e\n\u003cth\u003eCubic capacity\u003c\/th\u003e\n\u003cth\u003eCylinder\u003c\/th\u003e\n\u003cth\u003eFour wheel drive\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDODGE\u003c\/td\u003e\n\u003ctd\u003eCHALLENGER Coupe 09\/2007-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e3.5\u003c\/td\u003e\n\u003ctd\u003eCoupe\u003c\/td\u003e\n\u003ctd\u003ePetrol\u003c\/td\u003e\n\u003ctd\u003e186 KW\u003c\/td\u003e\n\u003ctd\u003e3518 ccm\u003c\/td\u003e\n\u003ctd\u003e6 Cylinder\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDODGE\u003c\/td\u003e\n\u003ctd\u003eCHALLENGER Coupe 09\/2007-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e3.6 AWD\u003c\/td\u003e\n\u003ctd\u003eCoupe\u003c\/td\u003e\n\u003ctd\u003ePetrol\u003c\/td\u003e\n\u003ctd\u003e227 KW\u003c\/td\u003e\n\u003ctd\u003e3604 ccm\u003c\/td\u003e\n\u003ctd\u003e6 Cylinder\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDODGE\u003c\/td\u003e\n\u003ctd\u003eCHALLENGER Coupe 09\/2007-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e3.6\u003c\/td\u003e\n\u003ctd\u003eCoupe\u003c\/td\u003e\n\u003ctd\u003ePetrol\u003c\/td\u003e\n\u003ctd\u003e227 KW\u003c\/td\u003e\n\u003ctd\u003e3604 ccm\u003c\/td\u003e\n\u003ctd\u003e6 Cylinder\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDODGE\u003c\/td\u003e\n\u003ctd\u003eCHALLENGER Coupe 09\/2007-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e5.7\u003c\/td\u003e\n\u003ctd\u003eCoupe\u003c\/td\u003e\n\u003ctd\u003ePetrol\u003c\/td\u003e\n\u003ctd\u003e277 KW\u003c\/td\u003e\n\u003ctd\u003e5654 ccm\u003c\/td\u003e\n\u003ctd\u003e8 Cylinder\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDODGE\u003c\/td\u003e\n\u003ctd\u003eCHALLENGER Coupe 09\/2007-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e5.7\u003c\/td\u003e\n\u003ctd\u003eCoupe\u003c\/td\u003e\n\u003ctd\u003ePetrol\u003c\/td\u003e\n\u003ctd\u003e279 KW\u003c\/td\u003e\n\u003ctd\u003e5654 ccm\u003c\/td\u003e\n\u003ctd\u003e8 Cylinder\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDODGE\u003c\/td\u003e\n\u003ctd\u003eCHALLENGER Coupe 09\/2007-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e5.7\u003c\/td\u003e\n\u003ctd\u003eCoupe\u003c\/td\u003e\n\u003ctd\u003ePetrol\u003c\/td\u003e\n\u003ctd\u003e280 KW\u003c\/td\u003e\n\u003ctd\u003e5654 ccm\u003c\/td\u003e\n\u003ctd\u003e8 Cylinder\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDODGE\u003c\/td\u003e\n\u003ctd\u003eCHALLENGER Coupe 09\/2007-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e6.1 SRT8\u003c\/td\u003e\n\u003ctd\u003eCoupe\u003c\/td\u003e\n\u003ctd\u003ePetrol\u003c\/td\u003e\n\u003ctd\u003e313 KW\u003c\/td\u003e\n\u003ctd\u003e6059 ccm\u003c\/td\u003e\n\u003ctd\u003e8 Cylinder\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDODGE\u003c\/td\u003e\n\u003ctd\u003eCHALLENGER Coupe 09\/2007-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e6.1 SRT8\u003c\/td\u003e\n\u003ctd\u003eCoupe\u003c\/td\u003e\n\u003ctd\u003ePetrol\u003c\/td\u003e\n\u003ctd\u003e317 KW\u003c\/td\u003e\n\u003ctd\u003e6059 ccm\u003c\/td\u003e\n\u003ctd\u003e8 Cylinder\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDODGE\u003c\/td\u003e\n\u003ctd\u003eCHALLENGER Coupe 09\/2007-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e6.2 SRT Demon 170\u003c\/td\u003e\n\u003ctd\u003eCoupe\u003c\/td\u003e\n\u003ctd\u003ePetrol\u003c\/td\u003e\n\u003ctd\u003e764 KW\u003c\/td\u003e\n\u003ctd\u003e6166 ccm\u003c\/td\u003e\n\u003ctd\u003e8 Cylinder\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDODGE\u003c\/td\u003e\n\u003ctd\u003eCHALLENGER Coupe 09\/2007-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e6.2 SRT Demon\u003c\/td\u003e\n\u003ctd\u003eCoupe\u003c\/td\u003e\n\u003ctd\u003ePetrol\u003c\/td\u003e\n\u003ctd\u003e626 KW\u003c\/td\u003e\n\u003ctd\u003e6166 ccm\u003c\/td\u003e\n\u003ctd\u003e8 Cylinder\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDODGE\u003c\/td\u003e\n\u003ctd\u003eCHALLENGER Coupe 09\/2007-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e6.2 SRT Hellcat Redeye\u003c\/td\u003e\n\u003ctd\u003eCoupe\u003c\/td\u003e\n\u003ctd\u003ePetrol\u003c\/td\u003e\n\u003ctd\u003e586 KW\u003c\/td\u003e\n\u003ctd\u003e6166 ccm\u003c\/td\u003e\n\u003ctd\u003e8 Cylinder\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDODGE\u003c\/td\u003e\n\u003ctd\u003eCHALLENGER Coupe 09\/2007-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e6.2 SRT Hellcat Redeye\u003c\/td\u003e\n\u003ctd\u003eCoupe\u003c\/td\u003e\n\u003ctd\u003ePetrol\u003c\/td\u003e\n\u003ctd\u003e594 KW\u003c\/td\u003e\n\u003ctd\u003e6166 ccm\u003c\/td\u003e\n\u003ctd\u003e8 Cylinder\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDODGE\u003c\/td\u003e\n\u003ctd\u003eCHALLENGER Coupe 09\/2007-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e6.2 SRT Hellcat\u003c\/td\u003e\n\u003ctd\u003eCoupe\u003c\/td\u003e\n\u003ctd\u003ePetrol\u003c\/td\u003e\n\u003ctd\u003e527 KW\u003c\/td\u003e\n\u003ctd\u003e6166 ccm\u003c\/td\u003e\n\u003ctd\u003e8 Cylinder\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDODGE\u003c\/td\u003e\n\u003ctd\u003eCHALLENGER Coupe 09\/2007-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e6.2 SRT Hellcat\u003c\/td\u003e\n\u003ctd\u003eCoupe\u003c\/td\u003e\n\u003ctd\u003ePetrol\u003c\/td\u003e\n\u003ctd\u003e602 KW\u003c\/td\u003e\n\u003ctd\u003e6166 ccm\u003c\/td\u003e\n\u003ctd\u003e8 Cylinder\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDODGE\u003c\/td\u003e\n\u003ctd\u003eCHALLENGER Coupe 09\/2007-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e6.4 SRT8\u003c\/td\u003e\n\u003ctd\u003eCoupe\u003c\/td\u003e\n\u003ctd\u003ePetrol\u003c\/td\u003e\n\u003ctd\u003e346 KW\u003c\/td\u003e\n\u003ctd\u003e6417 ccm\u003c\/td\u003e\n\u003ctd\u003e8 Cylinder\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDODGE\u003c\/td\u003e\n\u003ctd\u003eCHALLENGER Coupe 09\/2007-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e6.4 SRT8\u003c\/td\u003e\n\u003ctd\u003eCoupe\u003c\/td\u003e\n\u003ctd\u003ePetrol\u003c\/td\u003e\n\u003ctd\u003e351 KW\u003c\/td\u003e\n\u003ctd\u003e6417 ccm\u003c\/td\u003e\n\u003ctd\u003e8 Cylinder\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDODGE\u003c\/td\u003e\n\u003ctd\u003eCHALLENGER Coupe 09\/2007-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e6.4\u003c\/td\u003e\n\u003ctd\u003eCoupe\u003c\/td\u003e\n\u003ctd\u003ePetrol\u003c\/td\u003e\n\u003ctd\u003e362 KW\u003c\/td\u003e\n\u003ctd\u003e6417 ccm\u003c\/td\u003e\n\u003ctd\u003e8 Cylinder\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"ST Suspension","offers":[{"title":"Default Title","offer_id":56538932380034,"sku":"KW-68510314","price":509.38,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/9381\/1260\/files\/68510314_001.jpg?v=1775995191"},{"product_id":"st-xta-coilovers-volkswagen-scirocco-13-r-09-up","title":"ST XTA Coilovers Volkswagen Scirocco 13 R 09-UP","description":"\u003cp\u003eFor maximum axle loads for your vehicle, please refer to your VIN plate. It is usually the third and fourth numbers for front and rear axle loads. \u003c\/p\u003e\u003cp\u003eFor those who demand the absolute best performance comes the ST XTA coilover. The full driving behaviour of your car can be adjusted using KW damper technology along with an adjustable aluminium uniball top mount for fine-tuning of the camber and caster!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePerformance driving in mind\u003c\/strong\u003e\u003cbr\u003eST XTA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminium adjustable topmount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy lowering adjustment\u003c\/strong\u003e\u003cbr\u003eLike all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XTA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKW Engineering: Exclusive for ST suspension\u003c\/strong\u003e\u003cbr\u003eThe high-quality ST XTA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLatest damping technology for maximum longevity\u003c\/li\u003e\n\u003cli\u003eReduced system friction for effective damping adjustment\u003c\/li\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle (when possible) with thread adjustment\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for an optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, race spring system and bumpers with dust protection\u003c\/li\u003e\n\u003cli\u003eAluminium adjustable uniball top mounts (when possible)\u003c\/li\u003e\n\u003cli\u003eScaled camber adjustment (optionally also caster), when possible\u003c\/li\u003e\n\u003cli\u003eExternally adjustable damping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003eOnly for cars with a clamp diameter of 55 mm on the front axle. To guarantee at maximum lowering the minimum clearance of the FA indicator light (350 mm) and day headlight (250 mm) beyond STVZO, they have to be modified At vehicles equipped with electronic damping DCC, the electronic damping control needs to be deactivated. Deactivation kit KW Part-no. 68510141.  \u003cstrong\u003eLowering Front: \u003c\/strong\u003e10-45mm\u003cstrong\u003eLowering Rear: \u003c\/strong\u003e10-45mm","brand":"ST Suspension","offers":[{"title":"Default Title","offer_id":56538932707714,"sku":"ST-18280894-2","price":1387.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/9381\/1260\/files\/stxta_uyb81ypkufhr7a1j_1b9ea9a2-bf6a-4e6e-a763-2f6743673fdd.jpg?v=1775995191"},{"product_id":"st-xta-coilovers-volkswagen-scirocco-13-2wd-08-up-max-front-axle-load-upto-1000kg","title":"ST XTA Coilovers Volkswagen Scirocco 13 2WD 08-UP - Max Front Axle Load Upto 1000kg","description":"\u003cp\u003eFor maximum axle loads for your vehicle, please refer to your VIN plate. It is usually the third and fourth numbers for front and rear axle loads. \u003c\/p\u003e\u003cp\u003eFor those who demand the absolute best performance comes the ST XTA coilover. The full driving behaviour of your car can be adjusted using KW damper technology along with an adjustable aluminium uniball top mount for fine-tuning of the camber and caster!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePerformance driving in mind\u003c\/strong\u003e\u003cbr\u003eST XTA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminium adjustable topmount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy lowering adjustment\u003c\/strong\u003e\u003cbr\u003eLike all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XTA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKW Engineering: Exclusive for ST suspension\u003c\/strong\u003e\u003cbr\u003eThe high-quality ST XTA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLatest damping technology for maximum longevity\u003c\/li\u003e\n\u003cli\u003eReduced system friction for effective damping adjustment\u003c\/li\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle (when possible) with thread adjustment\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for an optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, race spring system and bumpers with dust protection\u003c\/li\u003e\n\u003cli\u003eAluminium adjustable uniball top mounts (when possible)\u003c\/li\u003e\n\u003cli\u003eScaled camber adjustment (optionally also caster), when possible\u003c\/li\u003e\n\u003cli\u003eExternally adjustable damping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003eOnly for cars with a clamp diameter of 55 mm on the front axle. To guarantee at maximum lowering the minimum clearance of the FA indicator light (350 mm) and day headlight (250 mm) beyond STVZO, they have to be modified At vehicles equipped with electronic damping DCC, the electronic damping control needs to be deactivated. Deactivation kit KW Part-no. 68510141.  \u003cstrong\u003eLowering Front: \u003c\/strong\u003e20-55mm\u003cstrong\u003eLowering Rear: \u003c\/strong\u003e20-55mm","brand":"ST Suspension","offers":[{"title":"Default Title","offer_id":56538932904322,"sku":"ST-18280894","price":1387.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/9381\/1260\/files\/stxta_uyb81ypkufhr7a1j_261d803e-781c-4bd4-a5e1-2db11cb10b38.jpg?v=1775995192"},{"product_id":"st-xta-coilovers-volkswagen-scirocco-13-2wd-08-up-max-front-axle-load-1001-1090kg","title":"ST XTA Coilovers Volkswagen Scirocco 13 2WD 08-UP - Max Front Axle Load 1001-1090kg","description":"\u003cp\u003eFor maximum axle loads for your vehicle, please refer to your VIN plate. It is usually the third and fourth numbers for front and rear axle loads. \u003c\/p\u003e\u003cp\u003eFor those who demand the absolute best performance comes the ST XTA coilover. The full driving behaviour of your car can be adjusted using KW damper technology along with an adjustable aluminium uniball top mount for fine-tuning of the camber and caster!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePerformance driving in mind\u003c\/strong\u003e\u003cbr\u003eST XTA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminium adjustable topmount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy lowering adjustment\u003c\/strong\u003e\u003cbr\u003eLike all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XTA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKW Engineering: Exclusive for ST suspension\u003c\/strong\u003e\u003cbr\u003eThe high-quality ST XTA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLatest damping technology for maximum longevity\u003c\/li\u003e\n\u003cli\u003eReduced system friction for effective damping adjustment\u003c\/li\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle (when possible) with thread adjustment\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for an optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, race spring system and bumpers with dust protection\u003c\/li\u003e\n\u003cli\u003eAluminium adjustable uniball top mounts (when possible)\u003c\/li\u003e\n\u003cli\u003eScaled camber adjustment (optionally also caster), when possible\u003c\/li\u003e\n\u003cli\u003eExternally adjustable damping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003eOnly for cars with a clamp diameter of 55 mm on the front axle. To guarantee at maximum lowering the minimum clearance of the FA indicator light (350 mm) and day headlight (250 mm) beyond STVZO, they have to be modified At vehicles equipped with electronic damping DCC, the electronic damping control needs to be deactivated. Deactivation kit KW Part-no. 68510141.  \u003cstrong\u003eLowering Front: \u003c\/strong\u003e20-55mm\u003cstrong\u003eLowering Rear: \u003c\/strong\u003e20-55mm","brand":"ST Suspension","offers":[{"title":"Default Title","offer_id":56538932937090,"sku":"ST-18280894-1","price":1387.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/9381\/1260\/files\/stxta_uyb81ypkufhr7a1j_bfa53c96-c008-4f0f-9ae2-28dfe7cb6fad.jpg?v=1775995192"},{"product_id":"st-xta-coilovers-volkswagen-polo-6r-wrc-13-up","title":"ST XTA Coilovers Volkswagen Polo 6R WRC 13-UP","description":"\u003cp\u003eFor maximum axle loads for your vehicle, please refer to your VIN plate. It is usually the third and fourth numbers for front and rear axle loads. \u003c\/p\u003e\u003cp\u003eFor those who demand the absolute best performance comes the ST XTA coilover. The full driving behaviour of your car can be adjusted using KW damper technology along with an adjustable aluminium uniball top mount for fine-tuning of the camber and caster!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePerformance driving in mind\u003c\/strong\u003e\u003cbr\u003eST XTA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminium adjustable topmount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy lowering adjustment\u003c\/strong\u003e\u003cbr\u003eLike all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XTA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKW Engineering: Exclusive for ST suspension\u003c\/strong\u003e\u003cbr\u003eThe high-quality ST XTA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLatest damping technology for maximum longevity\u003c\/li\u003e\n\u003cli\u003eReduced system friction for effective damping adjustment\u003c\/li\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle (when possible) with thread adjustment\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for an optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, race spring system and bumpers with dust protection\u003c\/li\u003e\n\u003cli\u003eAluminium adjustable uniball top mounts (when possible)\u003c\/li\u003e\n\u003cli\u003eScaled camber adjustment (optionally also caster), when possible\u003c\/li\u003e\n\u003cli\u003eExternally adjustable damping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e    \u003cstrong\u003eLowering Front: \u003c\/strong\u003e5-30mm\u003cstrong\u003eLowering Rear: \u003c\/strong\u003e5-30mm","brand":"ST Suspension","offers":[{"title":"Default Title","offer_id":56538932969858,"sku":"ST-18281815-8","price":1288.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/9381\/1260\/files\/stxta_uyb81ypkufhr7a1j_cc1536d8-4c70-46b9-aa4f-dd323f76d9b5.jpg?v=1775995193"},{"product_id":"st-xta-coilovers-volkswagen-polo-6r-09-up-max-front-axle-load-upto-860kg","title":"ST XTA Coilovers Volkswagen Polo 6R 09-UP - Max Front Axle Load Upto 860kg","description":"\u003cp\u003eFor maximum axle loads for your vehicle, please refer to your VIN plate. It is usually the third and fourth numbers for front and rear axle loads. \u003c\/p\u003e\u003cp\u003eFor those who demand the absolute best performance comes the ST XTA coilover. The full driving behaviour of your car can be adjusted using KW damper technology along with an adjustable aluminium uniball top mount for fine-tuning of the camber and caster!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePerformance driving in mind\u003c\/strong\u003e\u003cbr\u003eST XTA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminium adjustable topmount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy lowering adjustment\u003c\/strong\u003e\u003cbr\u003eLike all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XTA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKW Engineering: Exclusive for ST suspension\u003c\/strong\u003e\u003cbr\u003eThe high-quality ST XTA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLatest damping technology for maximum longevity\u003c\/li\u003e\n\u003cli\u003eReduced system friction for effective damping adjustment\u003c\/li\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle (when possible) with thread adjustment\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for an optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, race spring system and bumpers with dust protection\u003c\/li\u003e\n\u003cli\u003eAluminium adjustable uniball top mounts (when possible)\u003c\/li\u003e\n\u003cli\u003eScaled camber adjustment (optionally also caster), when possible\u003c\/li\u003e\n\u003cli\u003eExternally adjustable damping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003eNot for vehicles with electronic damper control.    \u003cstrong\u003eLowering Front: \u003c\/strong\u003e20-50mm\u003cstrong\u003eLowering Rear: \u003c\/strong\u003e40-65mm","brand":"ST Suspension","offers":[{"title":"Default Title","offer_id":56538933035394,"sku":"ST-18281815-6","price":1288.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/9381\/1260\/files\/stxta_uyb81ypkufhr7a1j.jpg?v=1775995194"},{"product_id":"st-xta-coilovers-volkswagen-polo-6r-09-up-max-front-axle-load-861-960kg","title":"ST XTA Coilovers Volkswagen Polo 6R 09-UP - Max Front Axle Load 861-960kg","description":"\u003cp\u003eFor maximum axle loads for your vehicle, please refer to your VIN plate. It is usually the third and fourth numbers for front and rear axle loads. \u003c\/p\u003e\u003cp\u003eFor those who demand the absolute best performance comes the ST XTA coilover. The full driving behaviour of your car can be adjusted using KW damper technology along with an adjustable aluminium uniball top mount for fine-tuning of the camber and caster!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePerformance driving in mind\u003c\/strong\u003e\u003cbr\u003eST XTA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminium adjustable topmount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy lowering adjustment\u003c\/strong\u003e\u003cbr\u003eLike all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XTA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKW Engineering: Exclusive for ST suspension\u003c\/strong\u003e\u003cbr\u003eThe high-quality ST XTA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLatest damping technology for maximum longevity\u003c\/li\u003e\n\u003cli\u003eReduced system friction for effective damping adjustment\u003c\/li\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle (when possible) with thread adjustment\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for an optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, race spring system and bumpers with dust protection\u003c\/li\u003e\n\u003cli\u003eAluminium adjustable uniball top mounts (when possible)\u003c\/li\u003e\n\u003cli\u003eScaled camber adjustment (optionally also caster), when possible\u003c\/li\u003e\n\u003cli\u003eExternally adjustable damping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003eNot for vehicles with electronic damper control.    \u003cstrong\u003eLowering Front: \u003c\/strong\u003e20-50mm\u003cstrong\u003eLowering Rear: \u003c\/strong\u003e40-65mm","brand":"ST Suspension","offers":[{"title":"Default Title","offer_id":56538933166466,"sku":"ST-18281815-7","price":1288.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/9381\/1260\/files\/stxta_uyb81ypkufhr7a1j_4de09583-b08d-423c-8be6-6f7d1caddd5c.jpg?v=1775995194"},{"product_id":"st-xta-coilovers-volkswagen-new-beetle-98-up","title":"ST XTA Coilovers Volkswagen New Beetle 98-UP","description":"\u003cp\u003eFor maximum axle loads for your vehicle, please refer to your VIN plate. It is usually the third and fourth numbers for front and rear axle loads. \u003c\/p\u003e\u003cp\u003eFor those who demand the absolute best performance comes the ST XTA coilover. The full driving behaviour of your car can be adjusted using KW damper technology along with an adjustable aluminium uniball top mount for fine-tuning of the camber and caster!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePerformance driving in mind\u003c\/strong\u003e\u003cbr\u003eST XTA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminium adjustable topmount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy lowering adjustment\u003c\/strong\u003e\u003cbr\u003eLike all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XTA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKW Engineering: Exclusive for ST suspension\u003c\/strong\u003e\u003cbr\u003eThe high-quality ST XTA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLatest damping technology for maximum longevity\u003c\/li\u003e\n\u003cli\u003eReduced system friction for effective damping adjustment\u003c\/li\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle (when possible) with thread adjustment\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for an optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, race spring system and bumpers with dust protection\u003c\/li\u003e\n\u003cli\u003eAluminium adjustable uniball top mounts (when possible)\u003c\/li\u003e\n\u003cli\u003eScaled camber adjustment (optionally also caster), when possible\u003c\/li\u003e\n\u003cli\u003eExternally adjustable damping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003eIn combination with original wheels and tyres, wheelspacers might be necessary. We recommend a special anti roll bar kit (part no. 68550008) for models with a drive shaft diameter of min. 50mm. This is for improving the clearance of the right hand side drive shaft. Because of car specific differences a clearance is not always given. Please replace the anti-sway bar kit on max. tested lowering. This is for enough clearance of the right drive shaft. Anti-sway bar kit for cars without Xenon headlights: part no. 68550000. Anti-sway bar kit for cars with Xenon headlights: part no. 68550005.  \u003cstrong\u003eLowering Front: \u003c\/strong\u003e35-60mm\u003cstrong\u003eLowering Rear: \u003c\/strong\u003e30-60mm","brand":"ST Suspension","offers":[{"title":"Default Title","offer_id":56538933330306,"sku":"ST-18210805-3","price":1387.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/9381\/1260\/files\/stxta_1xasxhb8rsaidvk5_1173e2e8-223c-4bbc-a180-9dc9b7a95789.jpg?v=1775995194"},{"product_id":"st-xta-coilovers-volkswagen-golf-jetta-mk2-2wd-83-92","title":"ST XTA Coilovers Volkswagen Golf\/Jetta MK2 2WD 83-92","description":"\u003cp\u003eFor maximum axle loads for your vehicle, please refer to your VIN plate. It is usually the third and fourth numbers for front and rear axle loads. \u003c\/p\u003e\u003cp\u003eFor those who demand the absolute best performance comes the ST XTA coilover. The full driving behaviour of your car can be adjusted using KW damper technology along with an adjustable aluminium uniball top mount for fine-tuning of the camber and caster!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePerformance driving in mind\u003c\/strong\u003e\u003cbr\u003eST XTA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminium adjustable topmount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy lowering adjustment\u003c\/strong\u003e\u003cbr\u003eLike all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XTA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKW Engineering: Exclusive for ST suspension\u003c\/strong\u003e\u003cbr\u003eThe high-quality ST XTA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLatest damping technology for maximum longevity\u003c\/li\u003e\n\u003cli\u003eReduced system friction for effective damping adjustment\u003c\/li\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle (when possible) with thread adjustment\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for an optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, race spring system and bumpers with dust protection\u003c\/li\u003e\n\u003cli\u003eAluminium adjustable uniball top mounts (when possible)\u003c\/li\u003e\n\u003cli\u003eScaled camber adjustment (optionally also caster), when possible\u003c\/li\u003e\n\u003cli\u003eExternally adjustable damping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003eExcluding four wheel drive models.    \u003cstrong\u003eLowering Front: \u003c\/strong\u003e45-85mm\u003cstrong\u003eLowering Rear: \u003c\/strong\u003e45-85mm","brand":"ST Suspension","offers":[{"title":"Default Title","offer_id":56538933428610,"sku":"ST-18280803","price":1387.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/9381\/1260\/files\/stxta_1xasxhb8rsaidvk5_05b0cd0f-012b-4664-ba92-d0e794062950.jpg?v=1775995195"},{"product_id":"st-xta-coilovers-volkswagen-golf-mk7-r-au-hatchback-13-up","title":"ST XTA Coilovers Volkswagen Golf MK7 R AU Hatchback 13-UP","description":"\u003cp\u003eFor maximum axle loads for your vehicle, please refer to your VIN plate. It is usually the third and fourth numbers for front and rear axle loads. \u003c\/p\u003e\u003cp\u003eFor those who demand the absolute best performance comes the ST XTA coilover. The full driving behaviour of your car can be adjusted using KW damper technology along with an adjustable aluminium uniball top mount for fine-tuning of the camber and caster!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePerformance driving in mind\u003c\/strong\u003e\u003cbr\u003eST XTA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminium adjustable topmount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy lowering adjustment\u003c\/strong\u003e\u003cbr\u003eLike all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XTA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKW Engineering: Exclusive for ST suspension\u003c\/strong\u003e\u003cbr\u003eThe high-quality ST XTA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLatest damping technology for maximum longevity\u003c\/li\u003e\n\u003cli\u003eReduced system friction for effective damping adjustment\u003c\/li\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle (when possible) with thread adjustment\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for an optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, race spring system and bumpers with dust protection\u003c\/li\u003e\n\u003cli\u003eAluminium adjustable uniball top mounts (when possible)\u003c\/li\u003e\n\u003cli\u003eScaled camber adjustment (optionally also caster), when possible\u003c\/li\u003e\n\u003cli\u003eExternally adjustable damping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003eNot for vehicles with electronic damper control. Only for cars with a clamp diameter of 55 mm on the front axle. At vehicles equipped with electronic damping, the electronic damping control needs to be deactivated. Deactivation kit KW Part-no. 68510342.  \u003cstrong\u003eLowering Front: \u003c\/strong\u003e10-40mm\u003cstrong\u003eLowering Rear: \u003c\/strong\u003e20-45mm","brand":"ST Suspension","offers":[{"title":"Default Title","offer_id":56538933625218,"sku":"ST-1828080N-5","price":1387.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/9381\/1260\/files\/stxta_1xasxhb8rsaidvk5_6c6383c0-3295-4f0f-8826-9354bd3b62b9.jpg?v=1775995195"},{"product_id":"st-xta-coilovers-volkswagen-golf-mk7-gti-au-13-up","title":"ST XTA Coilovers Volkswagen Golf MK7 GTI AU 13-UP","description":"\u003cp\u003eFor maximum axle loads for your vehicle, please refer to your VIN plate. It is usually the third and fourth numbers for front and rear axle loads. \u003c\/p\u003e\u003cp\u003eFor those who demand the absolute best performance comes the ST XTA coilover. The full driving behaviour of your car can be adjusted using KW damper technology along with an adjustable aluminium uniball top mount for fine-tuning of the camber and caster!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePerformance driving in mind\u003c\/strong\u003e\u003cbr\u003eST XTA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminium adjustable topmount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy lowering adjustment\u003c\/strong\u003e\u003cbr\u003eLike all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XTA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKW Engineering: Exclusive for ST suspension\u003c\/strong\u003e\u003cbr\u003eThe high-quality ST XTA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLatest damping technology for maximum longevity\u003c\/li\u003e\n\u003cli\u003eReduced system friction for effective damping adjustment\u003c\/li\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle (when possible) with thread adjustment\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for an optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, race spring system and bumpers with dust protection\u003c\/li\u003e\n\u003cli\u003eAluminium adjustable uniball top mounts (when possible)\u003c\/li\u003e\n\u003cli\u003eScaled camber adjustment (optionally also caster), when possible\u003c\/li\u003e\n\u003cli\u003eExternally adjustable damping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003eNot for vehicles with electronic damper control. Only for cars with a clamp diameter of 55 mm on the front axle. At vehicles equipped with electronic damping, the electronic damping control needs to be deactivated. Deactivation kit KW Part-no. 68510342.  \u003cstrong\u003eLowering Front: \u003c\/strong\u003e25-55mm\u003cstrong\u003eLowering Rear: \u003c\/strong\u003e20-45mm","brand":"ST Suspension","offers":[{"title":"Default Title","offer_id":56538933789058,"sku":"ST-1828080N-4","price":1387.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/9381\/1260\/files\/stxta_1xasxhb8rsaidvk5_5d021542-40e2-4591-a89b-89a7e2d289ae.jpg?v=1775995196"},{"product_id":"st-xta-coilovers-volkswagen-golf-mk7-au-hatchback-4wd-irs-50mm-strut-12-up-max-front-axle-load-upto-965kg","title":"ST XTA Coilovers Volkswagen Golf MK7 AU Hatchback 4WD IRS 50mm Strut 12-UP - Max Front Axle Load Upto 965kg","description":"\u003cp\u003eFor maximum axle loads for your vehicle, please refer to your VIN plate. It is usually the third and fourth numbers for front and rear axle loads. \u003c\/p\u003e\u003cp\u003eFor those who demand the absolute best performance comes the ST XTA coilover. The full driving behaviour of your car can be adjusted using KW damper technology along with an adjustable aluminium uniball top mount for fine-tuning of the camber and caster!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePerformance driving in mind\u003c\/strong\u003e\u003cbr\u003eST XTA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminium adjustable topmount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy lowering adjustment\u003c\/strong\u003e\u003cbr\u003eLike all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XTA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKW Engineering: Exclusive for ST suspension\u003c\/strong\u003e\u003cbr\u003eThe high-quality ST XTA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLatest damping technology for maximum longevity\u003c\/li\u003e\n\u003cli\u003eReduced system friction for effective damping adjustment\u003c\/li\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle (when possible) with thread adjustment\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for an optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, race spring system and bumpers with dust protection\u003c\/li\u003e\n\u003cli\u003eAluminium adjustable uniball top mounts (when possible)\u003c\/li\u003e\n\u003cli\u003eScaled camber adjustment (optionally also caster), when possible\u003c\/li\u003e\n\u003cli\u003eExternally adjustable damping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003eNot for vehicles with electronic damper control. Only for cars with a clamp diameter of 50 mm on the front axle. At vehicles equipped with electronic damping, the electronic damping control needs to be deactivated. Deactivation kit KW Part-no. 68510342.  \u003cstrong\u003eLowering Front: \u003c\/strong\u003e35-65mm\u003cstrong\u003eLowering Rear: \u003c\/strong\u003e40-65mm","brand":"ST Suspension","offers":[{"title":"Default Title","offer_id":56538933920130,"sku":"ST-1828080G-4","price":1387.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/9381\/1260\/files\/stxta_1xasxhb8rsaidvk5_6a64b642-72ca-4894-b878-e2fef4c66eb0.jpg?v=1775995197"},{"product_id":"st-xta-coilovers-volkswagen-golf-mk7-au-hatchback-4wd-irs-50mm-strut-12-up-max-front-axle-load-966-1080kg","title":"ST XTA Coilovers Volkswagen Golf MK7 AU Hatchback 4WD IRS 50mm Strut 12-UP - Max Front Axle Load 966-1080kg","description":"\u003cp\u003eFor maximum axle loads for your vehicle, please refer to your VIN plate. It is usually the third and fourth numbers for front and rear axle loads. \u003c\/p\u003e\u003cp\u003eFor those who demand the absolute best performance comes the ST XTA coilover. The full driving behaviour of your car can be adjusted using KW damper technology along with an adjustable aluminium uniball top mount for fine-tuning of the camber and caster!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePerformance driving in mind\u003c\/strong\u003e\u003cbr\u003eST XTA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminium adjustable topmount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy lowering adjustment\u003c\/strong\u003e\u003cbr\u003eLike all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XTA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKW Engineering: Exclusive for ST suspension\u003c\/strong\u003e\u003cbr\u003eThe high-quality ST XTA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLatest damping technology for maximum longevity\u003c\/li\u003e\n\u003cli\u003eReduced system friction for effective damping adjustment\u003c\/li\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle (when possible) with thread adjustment\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for an optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, race spring system and bumpers with dust protection\u003c\/li\u003e\n\u003cli\u003eAluminium adjustable uniball top mounts (when possible)\u003c\/li\u003e\n\u003cli\u003eScaled camber adjustment (optionally also caster), when possible\u003c\/li\u003e\n\u003cli\u003eExternally adjustable damping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003eNot for vehicles with electronic damper control. Only for cars with a clamp diameter of 50 mm on the front axle. At vehicles equipped with electronic damping, the electronic damping control needs to be deactivated. Deactivation kit KW Part-no. 68510342.  \u003cstrong\u003eLowering Front: \u003c\/strong\u003e35-65mm\u003cstrong\u003eLowering Rear: \u003c\/strong\u003e40-65mm","brand":"ST Suspension","offers":[{"title":"Default Title","offer_id":56538934018434,"sku":"ST-1828080G-5","price":1387.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/9381\/1260\/files\/stxta_1xasxhb8rsaidvk5_77a0b7ad-6300-4e45-93b4-4bde07a4b6a7.jpg?v=1775995198"},{"product_id":"st-xta-coilovers-volkswagen-golf-mk7-au-hatchback-4wd-irs-55mm-strut-12-up","title":"ST XTA Coilovers Volkswagen Golf MK7 AU Hatchback 4WD IRS - 55mm Strut 12-UP","description":"\u003cp\u003eFor maximum axle loads for your vehicle, please refer to your VIN plate. It is usually the third and fourth numbers for front and rear axle loads. \u003c\/p\u003e\u003cp\u003eFor those who demand the absolute best performance comes the ST XTA coilover. The full driving behaviour of your car can be adjusted using KW damper technology along with an adjustable aluminium uniball top mount for fine-tuning of the camber and caster!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePerformance driving in mind\u003c\/strong\u003e\u003cbr\u003eST XTA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminium adjustable topmount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy lowering adjustment\u003c\/strong\u003e\u003cbr\u003eLike all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XTA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKW Engineering: Exclusive for ST suspension\u003c\/strong\u003e\u003cbr\u003eThe high-quality ST XTA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLatest damping technology for maximum longevity\u003c\/li\u003e\n\u003cli\u003eReduced system friction for effective damping adjustment\u003c\/li\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle (when possible) with thread adjustment\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for an optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, race spring system and bumpers with dust protection\u003c\/li\u003e\n\u003cli\u003eAluminium adjustable uniball top mounts (when possible)\u003c\/li\u003e\n\u003cli\u003eScaled camber adjustment (optionally also caster), when possible\u003c\/li\u003e\n\u003cli\u003eExternally adjustable damping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003eNot for vehicles with electronic damper control. Only for cars with a clamp diameter of 55 mm on the front axle. At vehicles equipped with electronic damping, the electronic damping control needs to be deactivated. Deactivation kit KW Part-no. 68510342.  \u003cstrong\u003eLowering Front: \u003c\/strong\u003e35-65mm\u003cstrong\u003eLowering Rear: \u003c\/strong\u003e40-65mm","brand":"ST Suspension","offers":[{"title":"Default Title","offer_id":56538934149506,"sku":"ST-1828080N-3","price":1387.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/9381\/1260\/files\/stxta_1xasxhb8rsaidvk5_dbb5c198-2306-4ee9-b740-4d05fd39d510.jpg?v=1775995199"},{"product_id":"st-xta-coilovers-volkswagen-golf-mk7-au-hatchback-2wd-irs-50mm-strut-12-up-max-front-axle-load-upto-965kg","title":"ST XTA Coilovers Volkswagen Golf MK7 AU Hatchback 2WD IRS 50mm Strut 12-UP - Max Front Axle Load Upto 965kg","description":"\u003cp\u003eFor maximum axle loads for your vehicle, please refer to your VIN plate. It is usually the third and fourth numbers for front and rear axle loads. \u003c\/p\u003e\u003cp\u003eFor those who demand the absolute best performance comes the ST XTA coilover. The full driving behaviour of your car can be adjusted using KW damper technology along with an adjustable aluminium uniball top mount for fine-tuning of the camber and caster!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePerformance driving in mind\u003c\/strong\u003e\u003cbr\u003eST XTA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminium adjustable topmount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy lowering adjustment\u003c\/strong\u003e\u003cbr\u003eLike all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XTA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKW Engineering: Exclusive for ST suspension\u003c\/strong\u003e\u003cbr\u003eThe high-quality ST XTA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLatest damping technology for maximum longevity\u003c\/li\u003e\n\u003cli\u003eReduced system friction for effective damping adjustment\u003c\/li\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle (when possible) with thread adjustment\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for an optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, race spring system and bumpers with dust protection\u003c\/li\u003e\n\u003cli\u003eAluminium adjustable uniball top mounts (when possible)\u003c\/li\u003e\n\u003cli\u003eScaled camber adjustment (optionally also caster), when possible\u003c\/li\u003e\n\u003cli\u003eExternally adjustable damping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003eNot for vehicles with electronic damper control. Only for cars with a clamp diameter of 50 mm on the front axle. At vehicles equipped with electronic damping, the electronic damping control needs to be deactivated. Deactivation kit KW Part-no. 68510342.  \u003cstrong\u003eLowering Front: \u003c\/strong\u003e35-65mm\u003cstrong\u003eLowering Rear: \u003c\/strong\u003e35-65mm","brand":"ST Suspension","offers":[{"title":"Default Title","offer_id":56538934247810,"sku":"ST-1828080G-2","price":1387.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/9381\/1260\/files\/stxta_1xasxhb8rsaidvk5_7b378bce-80d3-41dd-b954-33125e927f03.jpg?v=1775995199"},{"product_id":"st-xta-coilovers-volkswagen-golf-mk7-au-hatchback-2wd-irs-50mm-strut-12-up-max-front-axle-load-966-1080kg","title":"ST XTA Coilovers Volkswagen Golf MK7 AU Hatchback 2WD IRS 50mm Strut 12-UP - Max Front Axle Load 966-1080kg","description":"\u003cp\u003eFor maximum axle loads for your vehicle, please refer to your VIN plate. It is usually the third and fourth numbers for front and rear axle loads. \u003c\/p\u003e\u003cp\u003eFor those who demand the absolute best performance comes the ST XTA coilover. The full driving behaviour of your car can be adjusted using KW damper technology along with an adjustable aluminium uniball top mount for fine-tuning of the camber and caster!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePerformance driving in mind\u003c\/strong\u003e\u003cbr\u003eST XTA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminium adjustable topmount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy lowering adjustment\u003c\/strong\u003e\u003cbr\u003eLike all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XTA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKW Engineering: Exclusive for ST suspension\u003c\/strong\u003e\u003cbr\u003eThe high-quality ST XTA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLatest damping technology for maximum longevity\u003c\/li\u003e\n\u003cli\u003eReduced system friction for effective damping adjustment\u003c\/li\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle (when possible) with thread adjustment\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for an optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, race spring system and bumpers with dust protection\u003c\/li\u003e\n\u003cli\u003eAluminium adjustable uniball top mounts (when possible)\u003c\/li\u003e\n\u003cli\u003eScaled camber adjustment (optionally also caster), when possible\u003c\/li\u003e\n\u003cli\u003eExternally adjustable damping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003eNot for vehicles with electronic damper control. Only for cars with a clamp diameter of 50 mm on the front axle. At vehicles equipped with electronic damping, the electronic damping control needs to be deactivated. Deactivation kit KW Part-no. 68510342.  \u003cstrong\u003eLowering Front: \u003c\/strong\u003e35-65mm\u003cstrong\u003eLowering Rear: \u003c\/strong\u003e35-65mm","brand":"ST Suspension","offers":[{"title":"Default Title","offer_id":56538934346114,"sku":"ST-1828080G-3","price":1387.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/9381\/1260\/files\/stxta_1xasxhb8rsaidvk5_c7e9dfc5-0a45-44eb-bdc3-fe09a687346d.jpg?v=1775995200"},{"product_id":"st-xta-coilovers-volkswagen-golf-mk7-au-hatchback-2wd-irs-55mm-strut-12-up","title":"ST XTA Coilovers Volkswagen Golf MK7 AU Hatchback 2WD IRS - 55mm Strut 12-UP","description":"\u003cp\u003eFor maximum axle loads for your vehicle, please refer to your VIN plate. It is usually the third and fourth numbers for front and rear axle loads. \u003c\/p\u003e\u003cp\u003eFor those who demand the absolute best performance comes the ST XTA coilover. The full driving behaviour of your car can be adjusted using KW damper technology along with an adjustable aluminium uniball top mount for fine-tuning of the camber and caster!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePerformance driving in mind\u003c\/strong\u003e\u003cbr\u003eST XTA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminium adjustable topmount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy lowering adjustment\u003c\/strong\u003e\u003cbr\u003eLike all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XTA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKW Engineering: Exclusive for ST suspension\u003c\/strong\u003e\u003cbr\u003eThe high-quality ST XTA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLatest damping technology for maximum longevity\u003c\/li\u003e\n\u003cli\u003eReduced system friction for effective damping adjustment\u003c\/li\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle (when possible) with thread adjustment\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for an optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, race spring system and bumpers with dust protection\u003c\/li\u003e\n\u003cli\u003eAluminium adjustable uniball top mounts (when possible)\u003c\/li\u003e\n\u003cli\u003eScaled camber adjustment (optionally also caster), when possible\u003c\/li\u003e\n\u003cli\u003eExternally adjustable damping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003eNot for vehicles with electronic damper control. Only for cars with a clamp diameter of 55 mm on the front axle. At vehicles equipped with electronic damping, the electronic damping control needs to be deactivated. Deactivation kit KW Part-no. 68510342.  \u003cstrong\u003eLowering Front: \u003c\/strong\u003e35-65mm\u003cstrong\u003eLowering Rear: \u003c\/strong\u003e35-65mm","brand":"ST Suspension","offers":[{"title":"Default Title","offer_id":56538934444418,"sku":"ST-1828080N-2","price":1387.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/9381\/1260\/files\/stxta_1xasxhb8rsaidvk5_c19e527e-b795-459d-9bd6-0b4b96de76dd.jpg?v=1775995202"},{"product_id":"st-xta-coilovers-volkswagen-golf-mk6-r-1k-55mm-strut-09-up","title":"ST XTA Coilovers Volkswagen Golf MK6 R 1K 55mm Strut 09-UP","description":"\u003cp\u003eFor maximum axle loads for your vehicle, please refer to your VIN plate. It is usually the third and fourth numbers for front and rear axle loads. \u003c\/p\u003e\u003cp\u003eFor those who demand the absolute best performance comes the ST XTA coilover. The full driving behaviour of your car can be adjusted using KW damper technology along with an adjustable aluminium uniball top mount for fine-tuning of the camber and caster!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePerformance driving in mind\u003c\/strong\u003e\u003cbr\u003eST XTA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminium adjustable topmount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy lowering adjustment\u003c\/strong\u003e\u003cbr\u003eLike all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XTA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKW Engineering: Exclusive for ST suspension\u003c\/strong\u003e\u003cbr\u003eThe high-quality ST XTA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLatest damping technology for maximum longevity\u003c\/li\u003e\n\u003cli\u003eReduced system friction for effective damping adjustment\u003c\/li\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle (when possible) with thread adjustment\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for an optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, race spring system and bumpers with dust protection\u003c\/li\u003e\n\u003cli\u003eAluminium adjustable uniball top mounts (when possible)\u003c\/li\u003e\n\u003cli\u003eScaled camber adjustment (optionally also caster), when possible\u003c\/li\u003e\n\u003cli\u003eExternally adjustable damping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003eOnly for cars with a clamp diameter of 55 mm on the front axle. At vehicles equipped with electronic damping DCC, the electronic damping control needs to be deactivated. Deactivation kit KW Part-no. 68510141.   \u003cstrong\u003eLowering Front: \u003c\/strong\u003e5-35mm\u003cstrong\u003eLowering Rear: \u003c\/strong\u003e5-35mm","brand":"ST Suspension","offers":[{"title":"Default Title","offer_id":56538934641026,"sku":"ST-18210850-17","price":1387.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/9381\/1260\/files\/stxta_1xasxhb8rsaidvk5_43a7d62f-9781-4f61-8b88-8fe393cca6fe.jpg?v=1775995202"},{"product_id":"st-xta-coilovers-volkswagen-golf-mk6-gti-1k-55mm-strut-08-up","title":"ST XTA Coilovers Volkswagen Golf MK6 GTI 1K 55mm Strut 08-UP","description":"\u003cp\u003eFor maximum axle loads for your vehicle, please refer to your VIN plate. It is usually the third and fourth numbers for front and rear axle loads. \u003c\/p\u003e\u003cp\u003eFor those who demand the absolute best performance comes the ST XTA coilover. The full driving behaviour of your car can be adjusted using KW damper technology along with an adjustable aluminium uniball top mount for fine-tuning of the camber and caster!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePerformance driving in mind\u003c\/strong\u003e\u003cbr\u003eST XTA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminium adjustable topmount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy lowering adjustment\u003c\/strong\u003e\u003cbr\u003eLike all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XTA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKW Engineering: Exclusive for ST suspension\u003c\/strong\u003e\u003cbr\u003eThe high-quality ST XTA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLatest damping technology for maximum longevity\u003c\/li\u003e\n\u003cli\u003eReduced system friction for effective damping adjustment\u003c\/li\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle (when possible) with thread adjustment\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for an optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, race spring system and bumpers with dust protection\u003c\/li\u003e\n\u003cli\u003eAluminium adjustable uniball top mounts (when possible)\u003c\/li\u003e\n\u003cli\u003eScaled camber adjustment (optionally also caster), when possible\u003c\/li\u003e\n\u003cli\u003eExternally adjustable damping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003eExcluding four wheel drive models. Only for cars with a clamp diameter of 55 mm on the front axle. At vehicles equipped with electronic damping DCC, the electronic damping control needs to be deactivated. Deactivation kit KW Part-no. 68510141.  \u003cstrong\u003eLowering Front: \u003c\/strong\u003e10-40mm\u003cstrong\u003eLowering Rear: \u003c\/strong\u003e15-40mm","brand":"ST Suspension","offers":[{"title":"Default Title","offer_id":56538934739330,"sku":"ST-18281830-11","price":1387.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/9381\/1260\/files\/stxta_1xasxhb8rsaidvk5_7b4b6434-4f3b-43a2-a044-3c8a6fb14f5b.jpg?v=1775995203"},{"product_id":"st-xta-coilovers-volkswagen-golf-mk6-estate-1km-55mm-strut-09-up-max-front-axle-load-upto-1005kg","title":"ST XTA Coilovers Volkswagen Golf MK6 Estate 1KM 55mm Strut 09-UP - Max Front Axle Load Upto 1005kg","description":"\u003cp\u003eFor maximum axle loads for your vehicle, please refer to your VIN plate. It is usually the third and fourth numbers for front and rear axle loads. \u003c\/p\u003e\u003cp\u003eFor those who demand the absolute best performance comes the ST XTA coilover. The full driving behaviour of your car can be adjusted using KW damper technology along with an adjustable aluminium uniball top mount for fine-tuning of the camber and caster!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePerformance driving in mind\u003c\/strong\u003e\u003cbr\u003eST XTA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminium adjustable topmount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy lowering adjustment\u003c\/strong\u003e\u003cbr\u003eLike all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XTA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKW Engineering: Exclusive for ST suspension\u003c\/strong\u003e\u003cbr\u003eThe high-quality ST XTA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLatest damping technology for maximum longevity\u003c\/li\u003e\n\u003cli\u003eReduced system friction for effective damping adjustment\u003c\/li\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle (when possible) with thread adjustment\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for an optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, race spring system and bumpers with dust protection\u003c\/li\u003e\n\u003cli\u003eAluminium adjustable uniball top mounts (when possible)\u003c\/li\u003e\n\u003cli\u003eScaled camber adjustment (optionally also caster), when possible\u003c\/li\u003e\n\u003cli\u003eExternally adjustable damping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003eExcluding four wheel drive models. Only for cars with a clamp diameter of 55 mm on the front axle.   \u003cstrong\u003eLowering Front: \u003c\/strong\u003e25-55mm\u003cstrong\u003eLowering Rear: \u003c\/strong\u003e25-55mm","brand":"ST Suspension","offers":[{"title":"Default Title","offer_id":56538934903170,"sku":"ST-18210850-18","price":1387.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/9381\/1260\/files\/stxta_1xasxhb8rsaidvk5_e0d2d645-8886-410a-b1be-d0b3cdcc4484.jpg?v=1775995204"},{"product_id":"st-xta-coilovers-volkswagen-golf-mk6-estate-1km-55mm-strut-09-up-max-front-axle-load-1006-1100kg","title":"ST XTA Coilovers Volkswagen Golf MK6 Estate 1KM 55mm Strut 09-UP - Max Front Axle Load 1006-1100kg","description":"\u003cp\u003eFor maximum axle loads for your vehicle, please refer to your VIN plate. It is usually the third and fourth numbers for front and rear axle loads. \u003c\/p\u003e\u003cp\u003eFor those who demand the absolute best performance comes the ST XTA coilover. The full driving behaviour of your car can be adjusted using KW damper technology along with an adjustable aluminium uniball top mount for fine-tuning of the camber and caster!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePerformance driving in mind\u003c\/strong\u003e\u003cbr\u003eST XTA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminium adjustable topmount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy lowering adjustment\u003c\/strong\u003e\u003cbr\u003eLike all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XTA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKW Engineering: Exclusive for ST suspension\u003c\/strong\u003e\u003cbr\u003eThe high-quality ST XTA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLatest damping technology for maximum longevity\u003c\/li\u003e\n\u003cli\u003eReduced system friction for effective damping adjustment\u003c\/li\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle (when possible) with thread adjustment\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for an optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, race spring system and bumpers with dust protection\u003c\/li\u003e\n\u003cli\u003eAluminium adjustable uniball top mounts (when possible)\u003c\/li\u003e\n\u003cli\u003eScaled camber adjustment (optionally also caster), when possible\u003c\/li\u003e\n\u003cli\u003eExternally adjustable damping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003eExcluding four wheel drive models. Only for cars with a clamp diameter of 55 mm on the front axle.   \u003cstrong\u003eLowering Front: \u003c\/strong\u003e25-55mm\u003cstrong\u003eLowering Rear: \u003c\/strong\u003e25-55mm","brand":"ST Suspension","offers":[{"title":"Default Title","offer_id":56538935034242,"sku":"ST-18210850-19","price":1387.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/9381\/1260\/files\/stxta_1xasxhb8rsaidvk5_9d9b7c90-9612-4bcc-930e-9f797d8ff871.jpg?v=1775995205"},{"product_id":"st-xta-coilovers-volkswagen-golf-mk6-estate-1km-50mm-strut-09-up-max-front-axle-load-upto-1005kg","title":"ST XTA Coilovers Volkswagen Golf MK6 Estate 1KM 50mm Strut 09-UP - Max Front Axle Load Upto 1005kg","description":"\u003cp\u003eFor maximum axle loads for your vehicle, please refer to your VIN plate. It is usually the third and fourth numbers for front and rear axle loads. \u003c\/p\u003e\u003cp\u003eFor those who demand the absolute best performance comes the ST XTA coilover. The full driving behaviour of your car can be adjusted using KW damper technology along with an adjustable aluminium uniball top mount for fine-tuning of the camber and caster!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePerformance driving in mind\u003c\/strong\u003e\u003cbr\u003eST XTA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminium adjustable topmount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy lowering adjustment\u003c\/strong\u003e\u003cbr\u003eLike all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XTA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKW Engineering: Exclusive for ST suspension\u003c\/strong\u003e\u003cbr\u003eThe high-quality ST XTA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLatest damping technology for maximum longevity\u003c\/li\u003e\n\u003cli\u003eReduced system friction for effective damping adjustment\u003c\/li\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle (when possible) with thread adjustment\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for an optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, race spring system and bumpers with dust protection\u003c\/li\u003e\n\u003cli\u003eAluminium adjustable uniball top mounts (when possible)\u003c\/li\u003e\n\u003cli\u003eScaled camber adjustment (optionally also caster), when possible\u003c\/li\u003e\n\u003cli\u003eExternally adjustable damping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003eExcluding four wheel drive models. Only for cars with a clamp diameter of 50 mm on the front axle.   \u003cstrong\u003eLowering Front: \u003c\/strong\u003e25-55mm\u003cstrong\u003eLowering Rear: \u003c\/strong\u003e25-55mm","brand":"ST Suspension","offers":[{"title":"Default Title","offer_id":56538935132546,"sku":"ST-18210880-6","price":1387.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/9381\/1260\/files\/stxta_1xasxhb8rsaidvk5.jpg?v=1775995205"},{"product_id":"st-xta-coilovers-volkswagen-golf-mk6-estate-1km-50mm-strut-09-up-max-front-axle-load-1006-1100kg","title":"ST XTA Coilovers Volkswagen Golf MK6 Estate 1KM 50mm Strut 09-UP - Max Front Axle Load 1006-1100kg","description":"\u003cp\u003eFor maximum axle loads for your vehicle, please refer to your VIN plate. It is usually the third and fourth numbers for front and rear axle loads. \u003c\/p\u003e\u003cp\u003eFor those who demand the absolute best performance comes the ST XTA coilover. The full driving behaviour of your car can be adjusted using KW damper technology along with an adjustable aluminium uniball top mount for fine-tuning of the camber and caster!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePerformance driving in mind\u003c\/strong\u003e\u003cbr\u003eST XTA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminium adjustable topmount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy lowering adjustment\u003c\/strong\u003e\u003cbr\u003eLike all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XTA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKW Engineering: Exclusive for ST suspension\u003c\/strong\u003e\u003cbr\u003eThe high-quality ST XTA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLatest damping technology for maximum longevity\u003c\/li\u003e\n\u003cli\u003eReduced system friction for effective damping adjustment\u003c\/li\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle (when possible) with thread adjustment\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for an optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, race spring system and bumpers with dust protection\u003c\/li\u003e\n\u003cli\u003eAluminium adjustable uniball top mounts (when possible)\u003c\/li\u003e\n\u003cli\u003eScaled camber adjustment (optionally also caster), when possible\u003c\/li\u003e\n\u003cli\u003eExternally adjustable damping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003eExcluding four wheel drive models. Only for cars with a clamp diameter of 50 mm on the front axle.   \u003cstrong\u003eLowering Front: \u003c\/strong\u003e25-55mm\u003cstrong\u003eLowering Rear: \u003c\/strong\u003e25-55mm","brand":"ST Suspension","offers":[{"title":"Default Title","offer_id":56538935394690,"sku":"ST-18210880-7","price":1387.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/9381\/1260\/files\/stxta_pehthlhfyzoqeaog_64a0313d-c832-4fdc-b283-0b014af76ac2.jpg?v=1775995206"},{"product_id":"st-xta-coilovers-volkswagen-golf-mk6-convertible-1k-55mm-strut-11-up-max-front-axle-load-upto-1015kg","title":"ST XTA Coilovers Volkswagen Golf MK6 Convertible 1K 55mm Strut 11-UP - Max Front Axle Load Upto 1015kg","description":"\u003cp\u003eFor maximum axle loads for your vehicle, please refer to your VIN plate. It is usually the third and fourth numbers for front and rear axle loads. \u003c\/p\u003e\u003cp\u003eFor those who demand the absolute best performance comes the ST XTA coilover. The full driving behaviour of your car can be adjusted using KW damper technology along with an adjustable aluminium uniball top mount for fine-tuning of the camber and caster!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePerformance driving in mind\u003c\/strong\u003e\u003cbr\u003eST XTA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminium adjustable topmount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy lowering adjustment\u003c\/strong\u003e\u003cbr\u003eLike all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XTA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKW Engineering: Exclusive for ST suspension\u003c\/strong\u003e\u003cbr\u003eThe high-quality ST XTA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLatest damping technology for maximum longevity\u003c\/li\u003e\n\u003cli\u003eReduced system friction for effective damping adjustment\u003c\/li\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle (when possible) with thread adjustment\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for an optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, race spring system and bumpers with dust protection\u003c\/li\u003e\n\u003cli\u003eAluminium adjustable uniball top mounts (when possible)\u003c\/li\u003e\n\u003cli\u003eScaled camber adjustment (optionally also caster), when possible\u003c\/li\u003e\n\u003cli\u003eExternally adjustable damping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003eOnly for cars with a clamp diameter of 55 mm on the front axle. At vehicles equipped with electronic damping DCC, the electronic damping control needs to be deactivated. Deactivation kit KW Part-no. 68510141.   \u003cstrong\u003eLowering Front: \u003c\/strong\u003e35-65mm\u003cstrong\u003eLowering Rear: \u003c\/strong\u003e35-65mm","brand":"ST Suspension","offers":[{"title":"Default Title","offer_id":56538935492994,"sku":"ST-18210850-20","price":1387.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/9381\/1260\/files\/stxta_pehthlhfyzoqeaog_160648f7-9e57-41b7-8bb8-1f69e6ab75f6.jpg?v=1775995206"},{"product_id":"st-xta-coilovers-volkswagen-golf-mk6-convertible-1k-55mm-strut-11-up-max-front-axle-load-1016-1090kg","title":"ST XTA Coilovers Volkswagen Golf MK6 Convertible 1K 55mm Strut 11-UP - Max Front Axle Load 1016-1090kg","description":"\u003cp\u003eFor maximum axle loads for your vehicle, please refer to your VIN plate. It is usually the third and fourth numbers for front and rear axle loads. \u003c\/p\u003e\u003cp\u003eFor those who demand the absolute best performance comes the ST XTA coilover. The full driving behaviour of your car can be adjusted using KW damper technology along with an adjustable aluminium uniball top mount for fine-tuning of the camber and caster!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePerformance driving in mind\u003c\/strong\u003e\u003cbr\u003eST XTA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminium adjustable topmount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy lowering adjustment\u003c\/strong\u003e\u003cbr\u003eLike all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XTA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKW Engineering: Exclusive for ST suspension\u003c\/strong\u003e\u003cbr\u003eThe high-quality ST XTA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLatest damping technology for maximum longevity\u003c\/li\u003e\n\u003cli\u003eReduced system friction for effective damping adjustment\u003c\/li\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle (when possible) with thread adjustment\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for an optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, race spring system and bumpers with dust protection\u003c\/li\u003e\n\u003cli\u003eAluminium adjustable uniball top mounts (when possible)\u003c\/li\u003e\n\u003cli\u003eScaled camber adjustment (optionally also caster), when possible\u003c\/li\u003e\n\u003cli\u003eExternally adjustable damping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003eOnly for cars with a clamp diameter of 55 mm on the front axle. At vehicles equipped with electronic damping DCC, the electronic damping control needs to be deactivated. Deactivation kit KW Part-no. 68510141.   \u003cstrong\u003eLowering Front: \u003c\/strong\u003e35-65mm\u003cstrong\u003eLowering Rear: \u003c\/strong\u003e35-65mm","brand":"ST Suspension","offers":[{"title":"Default Title","offer_id":56538935624066,"sku":"ST-18210850-21","price":1387.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/9381\/1260\/files\/stxta_pehthlhfyzoqeaog_6bee8929-c98b-4ee5-bab5-ef71ea13de03.jpg?v=1775995207"},{"product_id":"st-xta-coilovers-volkswagen-golf-mk6-convertible-1k-50mm-strut-11-up-max-front-axle-load-upto-1015kg","title":"ST XTA Coilovers Volkswagen Golf MK6 Convertible 1K 50mm Strut 11-UP - Max Front Axle Load Upto 1015kg","description":"\u003cp\u003eFor maximum axle loads for your vehicle, please refer to your VIN plate. It is usually the third and fourth numbers for front and rear axle loads. \u003c\/p\u003e\u003cp\u003eFor those who demand the absolute best performance comes the ST XTA coilover. The full driving behaviour of your car can be adjusted using KW damper technology along with an adjustable aluminium uniball top mount for fine-tuning of the camber and caster!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePerformance driving in mind\u003c\/strong\u003e\u003cbr\u003eST XTA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminium adjustable topmount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy lowering adjustment\u003c\/strong\u003e\u003cbr\u003eLike all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XTA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKW Engineering: Exclusive for ST suspension\u003c\/strong\u003e\u003cbr\u003eThe high-quality ST XTA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLatest damping technology for maximum longevity\u003c\/li\u003e\n\u003cli\u003eReduced system friction for effective damping adjustment\u003c\/li\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle (when possible) with thread adjustment\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for an optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, race spring system and bumpers with dust protection\u003c\/li\u003e\n\u003cli\u003eAluminium adjustable uniball top mounts (when possible)\u003c\/li\u003e\n\u003cli\u003eScaled camber adjustment (optionally also caster), when possible\u003c\/li\u003e\n\u003cli\u003eExternally adjustable damping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003eOnly for cars with a clamp diameter of 50 mm on the front axle. At vehicles equipped with electronic damping DCC, the electronic damping control needs to be deactivated. Deactivation kit KW Part-no. 68510141.   \u003cstrong\u003eLowering Front: \u003c\/strong\u003e35-65mm\u003cstrong\u003eLowering Rear: \u003c\/strong\u003e35-65mm","brand":"ST Suspension","offers":[{"title":"Default Title","offer_id":56538935853442,"sku":"ST-18210880-8","price":1387.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/9381\/1260\/files\/stxta_pehthlhfyzoqeaog_5e281f0c-8b97-45d7-bfae-7535e72eceeb.jpg?v=1775995207"},{"product_id":"st-xta-coilovers-volkswagen-golf-mk6-convertible-1k-50mm-strut-11-up-max-front-axle-load-1016-1090kg","title":"ST XTA Coilovers Volkswagen Golf MK6 Convertible 1K 50mm Strut 11-UP - Max Front Axle Load 1016-1090kg","description":"\u003cp\u003eFor maximum axle loads for your vehicle, please refer to your VIN plate. It is usually the third and fourth numbers for front and rear axle loads. \u003c\/p\u003e\u003cp\u003eFor those who demand the absolute best performance comes the ST XTA coilover. The full driving behaviour of your car can be adjusted using KW damper technology along with an adjustable aluminium uniball top mount for fine-tuning of the camber and caster!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePerformance driving in mind\u003c\/strong\u003e\u003cbr\u003eST XTA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminium adjustable topmount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy lowering adjustment\u003c\/strong\u003e\u003cbr\u003eLike all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XTA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKW Engineering: Exclusive for ST suspension\u003c\/strong\u003e\u003cbr\u003eThe high-quality ST XTA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLatest damping technology for maximum longevity\u003c\/li\u003e\n\u003cli\u003eReduced system friction for effective damping adjustment\u003c\/li\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle (when possible) with thread adjustment\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for an optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, race spring system and bumpers with dust protection\u003c\/li\u003e\n\u003cli\u003eAluminium adjustable uniball top mounts (when possible)\u003c\/li\u003e\n\u003cli\u003eScaled camber adjustment (optionally also caster), when possible\u003c\/li\u003e\n\u003cli\u003eExternally adjustable damping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003eOnly for cars with a clamp diameter of 50 mm on the front axle. At vehicles equipped with electronic damping DCC, the electronic damping control needs to be deactivated. Deactivation kit KW Part-no. 68510141.   \u003cstrong\u003eLowering Front: \u003c\/strong\u003e35-65mm\u003cstrong\u003eLowering Rear: \u003c\/strong\u003e35-65mm","brand":"ST Suspension","offers":[{"title":"Default Title","offer_id":56538936017282,"sku":"ST-18210880-9","price":1387.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/9381\/1260\/files\/stxta_pehthlhfyzoqeaog_870bb9c1-d1e9-4b06-9b2f-ba94611f5392.jpg?v=1775995208"},{"product_id":"st-xta-coilovers-volkswagen-golf-mk6-1k-1km-saloon-4wd-08-up","title":"ST XTA Coilovers Volkswagen Golf MK6 1K\/1KM Saloon 4WD 08-UP","description":"\u003cp\u003eFor maximum axle loads for your vehicle, please refer to your VIN plate. It is usually the third and fourth numbers for front and rear axle loads. \u003c\/p\u003e\u003cp\u003eFor those who demand the absolute best performance comes the ST XTA coilover. The full driving behaviour of your car can be adjusted using KW damper technology along with an adjustable aluminium uniball top mount for fine-tuning of the camber and caster!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePerformance driving in mind\u003c\/strong\u003e\u003cbr\u003eST XTA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminium adjustable topmount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy lowering adjustment\u003c\/strong\u003e\u003cbr\u003eLike all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XTA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKW Engineering: Exclusive for ST suspension\u003c\/strong\u003e\u003cbr\u003eThe high-quality ST XTA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLatest damping technology for maximum longevity\u003c\/li\u003e\n\u003cli\u003eReduced system friction for effective damping adjustment\u003c\/li\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle (when possible) with thread adjustment\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for an optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, race spring system and bumpers with dust protection\u003c\/li\u003e\n\u003cli\u003eAluminium adjustable uniball top mounts (when possible)\u003c\/li\u003e\n\u003cli\u003eScaled camber adjustment (optionally also caster), when possible\u003c\/li\u003e\n\u003cli\u003eExternally adjustable damping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003eOnly for cars with a clamp diameter of 55 mm on the front axle.    \u003cstrong\u003eLowering Front: \u003c\/strong\u003e35-65mm\u003cstrong\u003eLowering Rear: \u003c\/strong\u003e30-60mm","brand":"ST Suspension","offers":[{"title":"Default Title","offer_id":56538936181122,"sku":"ST-18210850-22","price":1387.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/9381\/1260\/files\/stxta_pehthlhfyzoqeaog_c0543e15-f163-452a-8f7e-e1e1f1b37068.jpg?v=1775995209"},{"product_id":"st-xta-coilovers-volkswagen-golf-mk6-1k-1km-55mm-strut-08-up","title":"ST XTA Coilovers Volkswagen Golf MK6 1K\/1KM 55mm Strut 08-UP","description":"\u003cp\u003eFor maximum axle loads for your vehicle, please refer to your VIN plate. It is usually the third and fourth numbers for front and rear axle loads. \u003c\/p\u003e\u003cp\u003eFor those who demand the absolute best performance comes the ST XTA coilover. The full driving behaviour of your car can be adjusted using KW damper technology along with an adjustable aluminium uniball top mount for fine-tuning of the camber and caster!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePerformance driving in mind\u003c\/strong\u003e\u003cbr\u003eST XTA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminium adjustable topmount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy lowering adjustment\u003c\/strong\u003e\u003cbr\u003eLike all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XTA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKW Engineering: Exclusive for ST suspension\u003c\/strong\u003e\u003cbr\u003eThe high-quality ST XTA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLatest damping technology for maximum longevity\u003c\/li\u003e\n\u003cli\u003eReduced system friction for effective damping adjustment\u003c\/li\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle (when possible) with thread adjustment\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for an optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, race spring system and bumpers with dust protection\u003c\/li\u003e\n\u003cli\u003eAluminium adjustable uniball top mounts (when possible)\u003c\/li\u003e\n\u003cli\u003eScaled camber adjustment (optionally also caster), when possible\u003c\/li\u003e\n\u003cli\u003eExternally adjustable damping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003eOnly for cars with a clamp diameter of 55 mm on the front axle.    \u003cstrong\u003eLowering Front: \u003c\/strong\u003e35-65mm\u003cstrong\u003eLowering Rear: \u003c\/strong\u003e30-60mm","brand":"ST Suspension","offers":[{"title":"Default Title","offer_id":56538936246658,"sku":"ST-18210850-23","price":1387.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/9381\/1260\/files\/stxta_pehthlhfyzoqeaog_94e902a5-d895-4b51-b2be-b8bfacb5c5fb.jpg?v=1775995209"},{"product_id":"st-xta-coilovers-volkswagen-golf-mk6-1k-55mm-strut-08-up-max-front-axle-load-upto-1035kg","title":"ST XTA Coilovers Volkswagen Golf MK6 1K 55mm Strut 08-UP - Max Front Axle Load Upto 1035kg","description":"\u003cp\u003eFor maximum axle loads for your vehicle, please refer to your VIN plate. It is usually the third and fourth numbers for front and rear axle loads. \u003c\/p\u003e\u003cp\u003eFor those who demand the absolute best performance comes the ST XTA coilover. The full driving behaviour of your car can be adjusted using KW damper technology along with an adjustable aluminium uniball top mount for fine-tuning of the camber and caster!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePerformance driving in mind\u003c\/strong\u003e\u003cbr\u003eST XTA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminium adjustable topmount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy lowering adjustment\u003c\/strong\u003e\u003cbr\u003eLike all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XTA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKW Engineering: Exclusive for ST suspension\u003c\/strong\u003e\u003cbr\u003eThe high-quality ST XTA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLatest damping technology for maximum longevity\u003c\/li\u003e\n\u003cli\u003eReduced system friction for effective damping adjustment\u003c\/li\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle (when possible) with thread adjustment\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for an optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, race spring system and bumpers with dust protection\u003c\/li\u003e\n\u003cli\u003eAluminium adjustable uniball top mounts (when possible)\u003c\/li\u003e\n\u003cli\u003eScaled camber adjustment (optionally also caster), when possible\u003c\/li\u003e\n\u003cli\u003eExternally adjustable damping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003eExcluding four wheel drive models. Only for cars with a clamp diameter of 55 mm on the front axle. At vehicles equipped with electronic damping DCC, the electronic damping control needs to be deactivated. Deactivation kit KW Part-no. 68510141.  \u003cstrong\u003eLowering Front: \u003c\/strong\u003e35-65mm\u003cstrong\u003eLowering Rear: \u003c\/strong\u003e35-65mm","brand":"ST Suspension","offers":[{"title":"Default Title","offer_id":56538936443266,"sku":"ST-18281830-8","price":1387.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/9381\/1260\/files\/stxta_pehthlhfyzoqeaog_38f76941-5678-4830-8fb3-1819f5015d3f.jpg?v=1775995209"},{"product_id":"st-xta-coilovers-volkswagen-golf-mk6-1k-55mm-strut-08-up-max-front-axle-load-1036-1105kg","title":"ST XTA Coilovers Volkswagen Golf MK6 1K 55mm Strut 08-UP - Max Front Axle Load 1036-1105kg","description":"\u003cp\u003eFor maximum axle loads for your vehicle, please refer to your VIN plate. It is usually the third and fourth numbers for front and rear axle loads. \u003c\/p\u003e\u003cp\u003eFor those who demand the absolute best performance comes the ST XTA coilover. The full driving behaviour of your car can be adjusted using KW damper technology along with an adjustable aluminium uniball top mount for fine-tuning of the camber and caster!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePerformance driving in mind\u003c\/strong\u003e\u003cbr\u003eST XTA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminium adjustable topmount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy lowering adjustment\u003c\/strong\u003e\u003cbr\u003eLike all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XTA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKW Engineering: Exclusive for ST suspension\u003c\/strong\u003e\u003cbr\u003eThe high-quality ST XTA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLatest damping technology for maximum longevity\u003c\/li\u003e\n\u003cli\u003eReduced system friction for effective damping adjustment\u003c\/li\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle (when possible) with thread adjustment\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for an optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, race spring system and bumpers with dust protection\u003c\/li\u003e\n\u003cli\u003eAluminium adjustable uniball top mounts (when possible)\u003c\/li\u003e\n\u003cli\u003eScaled camber adjustment (optionally also caster), when possible\u003c\/li\u003e\n\u003cli\u003eExternally adjustable damping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003eExcluding four wheel drive models. Only for cars with a clamp diameter of 55 mm on the front axle. At vehicles equipped with electronic damping DCC, the electronic damping control needs to be deactivated. Deactivation kit KW Part-no. 68510141.  \u003cstrong\u003eLowering Front: \u003c\/strong\u003e35-65mm\u003cstrong\u003eLowering Rear: \u003c\/strong\u003e35-65mm","brand":"ST Suspension","offers":[{"title":"Default Title","offer_id":56538936607106,"sku":"ST-18281830-9","price":1387.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/9381\/1260\/files\/stxta_pehthlhfyzoqeaog_e789a837-d254-43a6-9858-98336cc1db46.jpg?v=1775995210"},{"product_id":"st-xta-coilovers-volkswagen-golf-mk6-1k-55mm-strut-08-up-max-front-axle-load-1106-1170kg","title":"ST XTA Coilovers Volkswagen Golf MK6 1K 55mm Strut 08-UP - Max Front Axle Load 1106-1170kg","description":"\u003cp\u003eFor maximum axle loads for your vehicle, please refer to your VIN plate. It is usually the third and fourth numbers for front and rear axle loads. \u003c\/p\u003e\u003cp\u003eFor those who demand the absolute best performance comes the ST XTA coilover. The full driving behaviour of your car can be adjusted using KW damper technology along with an adjustable aluminium uniball top mount for fine-tuning of the camber and caster!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePerformance driving in mind\u003c\/strong\u003e\u003cbr\u003eST XTA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminium adjustable topmount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy lowering adjustment\u003c\/strong\u003e\u003cbr\u003eLike all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XTA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKW Engineering: Exclusive for ST suspension\u003c\/strong\u003e\u003cbr\u003eThe high-quality ST XTA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLatest damping technology for maximum longevity\u003c\/li\u003e\n\u003cli\u003eReduced system friction for effective damping adjustment\u003c\/li\u003e\n\u003cli\u003eIndividual lowering within the tested adjustment range\u003c\/li\u003e\n\u003cli\u003eFront and rear axle (when possible) with thread adjustment\u003c\/li\u003e\n\u003cli\u003eGalvanized coilover struts with additional coating for an optimized corrosion protection\u003c\/li\u003e\n\u003cli\u003eComplete solution with adjustable spring plate, race spring system and bumpers with dust protection\u003c\/li\u003e\n\u003cli\u003eAluminium adjustable uniball top mounts (when possible)\u003c\/li\u003e\n\u003cli\u003eScaled camber adjustment (optionally also caster), when possible\u003c\/li\u003e\n\u003cli\u003eExternally adjustable damping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003eExcluding four wheel drive models. Only for cars with a clamp diameter of 55 mm on the front axle. At vehicles equipped with electronic damping DCC, the electronic damping control needs to be deactivated. Deactivation kit KW Part-no. 68510141.  \u003cstrong\u003eLowering Front: \u003c\/strong\u003e35-65mm\u003cstrong\u003eLowering Rear: \u003c\/strong\u003e35-65mm","brand":"ST Suspension","offers":[{"title":"Default Title","offer_id":56538936705410,"sku":"ST-18281830-10","price":1387.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/9381\/1260\/files\/stxta_pehthlhfyzoqeaog_d811e345-6e24-4e0a-b8ff-6effc31a822d.jpg?v=1775995210"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0751\/9381\/1260\/collections\/ST_suspension_logo_menu.png?v=1775691166","url":"https:\/\/dcprestige.co.uk\/collections\/st-suspension.oembed","provider":"DC Prestige","version":"1.0","type":"link"}